BDDWL - A-12 PART A

Product Identification

Product ID:A-12 PART A
MSDS Date:01/01/1985
FSC:8040
NIIN:00-165-6551
MSDS Number: BDDWL

Responsible Party
ARMSTRONG PRODUCTS COMPANY

Emergency Phone: 219-267-3226

Cage: DO043

Contractor
MORTON THIOKOL,INC;ARMSTRONG PRODUCTS COMPANY
647 WARSAW, IN 46580-3811 US

Telephone: 219-267-3226

Cage: 98911

Ingredients

EPOXY RESIN

Fraction By Weight: 65 - 70%


CALCIUM OXIDE

CAS: 1305-78-8

RTECS: EW3100000

Fraction By Weight: >2%

OSHA PEL 5 MG/M3

ACGIH TLV: 2 MG/M3; 9192


IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: >2%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293


SILICA

RTECS: VV7320000

Fraction By Weight: >2%

ACGIH TLV: 20 MPPCF


ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: >2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Hazards

Effects of Overexposure:PRIMARY IRRITATION OF EYES & SKIN

First Aid

First Aid:WASH SKIN WITH SOAP & WATER.FLUSH EYES WITH WATER.

Fire Fighting

Flash Point:480F;249C COC
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL
Fire Fighting Procedures:DO NOT USE WATER. AVOID BREATHING SMOKE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:CLEAN WITH CLOTH-OBSERVE FIRE HAZARD IF
SOLVENTS ARE USED.SCOOP UP WITH ABSORBENT MATERIAL

Handling

Handling and Storage Precautions:HANDLE IN ACCORDANCE TO HAZARDOUS
POTENTIALITIES OF CURING AGENT WHEN MIXED THEREWITH

Exposure Controls

Respiratory Protection:NOT ORDINARILY REQUIRED
Ventilation:LOCAL-IF HEATED
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:AS NECESSARY TO AVOID SKIN CONTACT
Supplemental Safety and Health

Chemical Properties

HCC:N1
Spec Gravity:1.35
Solubility in Water:VERY SLIGHT
Appearance and Odor:RED-BROWN LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
SDTRONG OXIDIZING AGENTS
Stability Condition to Avoid:PREMATURE REACTION WITH EPOXY CURING
AGENTS. ACIDS.
Hazardous Decomposition Products:CO,ALDEHYDES
Conditions to Avoid Polymerization:EXOTHERMIC REACTION DURING CURE

Disposal

Waste Disposal Methods:CONTROLLED BURNING OR BURIAL

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.