BDFJN - 630 PROTECTIVE COATING

  • MSDS: BDFJN
  • Manufacturer: DOW CORNING CORP
  • Product Name: 630 PROTECTIVE COATING
  • National Stock Number: 5970-00-171-1527
Product Identification

Product ID:630 PROTECTIVE COATING
MSDS Date:01/01/1985
FSC:5970
NIIN:00-171-1527
MSDS Number: BDFJN

Responsible Party
DOW CORNING CORP.
3901 SOUTH SAGINAW ROAD
MIDLAND, MI 48640
US

Emergency Phone: 517-496-5900

Info Phone: 517-496-5900

Cage: 5D028

Contractor
DOW CORNING CORP
AUBURN, MI 48611 US

Telephone: 517-496-4388

Cage: 71984

Ingredients

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 50.0%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:MAY IRRITATE SKIN & EYES.MAY CAUSE SLIGHT
ANESTHESIA,HEADACHES,ETC.

First Aid

First Aid:SKIN/EYES:FLUSH W/WATER.INHALATION:REMOVE TO FRESH AIR.
OBTAIN MEDICAL ATTENTION.

Fire Fighting

Flash Point:55F,13C CC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:CO*2 OR FOAM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:MOP,WIPE OR SOAK UP W/ABSORBENT MATERIAL.

Handling

Handling and Storage Precautions:AS PRODUCT IS FLAMMABLE,REASONABLE
CARE SHOULD BE TAKEN IN HANDLING.
Other Precautions:KEEP CONTAINER CLOSURE AIR TIGHT.

Exposure Controls

Respiratory Protection:ORGANIC VAPOR TYPE
Ventilation:MECHANICAL(GENERAL)
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED BY LOCAL AUTHORITIES.
Supplemental Safety and Health
RECORDS OF THIS CENTER REVEALED THAT NSN HAS BEEN CANCELLED.

Chemical Properties

HCC:F2
Boiling Pt:=143.3C, 290.F
Vapor Pres:10.
Spec Gravity:0.9
Evaporation Rate & Reference:<1.0(ETHER)
Solubility in Water:<0.1%
Appearance and Odor:LIQUID,SOLVENT ODOR
Percent Volatiles by Volume:>10.

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING & CORROSIVE MATERIALS
Stability Condition to Avoid:SOURCE OF IGNITION
Hazardous Decomposition Products:SIO*2,CO*2 & TRCS. OF INCOMPLETELY
BURNED PROD.

Disposal

Waste Disposal Methods:REVIEW ALL LOCAL,STATE & FED REGS AND STATUTES
TO DETERMINE APPROVED PROCEDURES FOR SOLVENT
DISPOSAL.HOWEVER,RESIDUE FROM EVAPORATED SOLVENT CAN BE LAND FILLED
OR BURNED IAW LOCAL REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.