BDGPY - 781-700,URETHANE CATALYST

Export as PDF
Product Identification

Product ID:781-700,URETHANE CATALYST
MSDS Date:01/01/1987
FSC:8010
NIIN:00-181-8150
Kit Part:Y
MSDS Number: BDGPY

Responsible Party
AMERON, INDUSTRIAL COATINGS DIV.
201 N BERRY ST
BREA, CA 92621-3904
US

Cage: KO496

Contractor
AMERON, INDUSTRIAL COATINGS DIV.
BREA, CA 92621-3904 US

Telephone: 714-529-4597

Cage: KO496

Ingredients

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 11.2%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 9.2%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:INH: ANESTHETIC, IRRIT RESP TRAT OR ACUTE CNS
DEPRESS - HEADACHE, DIZ, UNCON, COMA. SKN & EYE:IRRIT

First Aid

First Aid:EYES: FLUSH W/WATER. SKIN: FLUSH W/WATER, REMOVE CONTAMINATED
CLOTHING. INH: REMOVE TO FRESH AIR. CALL A PHYSICIAN IF SYMPTOMS
PERSIST.

Fire Fighting

Flash Point:24 F TCC
Lower Limits:1.0
Extinguishing Media:SM FIRES: CO*2, DRY CHEMICAL. LG FIRE: POLYMER
FOAM.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS FOR
FIREMEN.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
EXPLODE FROM PRESSURE, KEEP COOLED W/WATER.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION! AVOID
BREATHING VAPORS. VENTILATE ROOM. REMOVE W/INERT ABSORBENT &
NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTY
IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS 1
FLAMMABLE OR COMBUSTIBLE LIQUID.
Other Precautions:DO NOT TAKE INTERNALLY. GROUND CONTAINERS WHEN
POURING. AVOID FREE FALL IN EXCESS OF A FEW IN. DO NOT FLAME CUT,
WELD ETC COATED MATERIAL W/O APPROVED RESPIRATOR OR APPROP. VENT.
ADD LABEL!

Exposure Controls

Respiratory Protection:RESTRICTED VENT: CHEM-MECH FIL. CL: AIR LINE
TYPE
Ventilation:KEEP TLV & LEL BELOW LIMIT & REMOVE DECOMP PROD FROM
WELDING
Protective Gloves:YES
Eye Protection:YES, FOR SPLASH
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING
Supplemental Safety and Health
PART B OF A TWO PART PRODUCT. SEE P/N INDICATOR A;781-500,UNDER SAME
NSN. CONFORMS TO MIL-C-81773C(AS),TYPE I. ALSO CONTAINS ETHYL
ACETATE, 27.7%,TLV=400 PPM. WT PEN GALLON 8.2 LBS.

Chemical Properties

Boiling Pt:B.P. Text:158 - 329 F
Vapor Pres:74.
Vapor Density:>1
Evaporation Rate & Reference:SLOWR THAN ETHER
Percent Volatiles by Volume:69.2

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FIRES, HEAT & HOT SURFACES.

Disposal

Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTAINERS. DISPOSE IN
ACCORDANCE W/FED., STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.