BDMTT - BRUNING COPYFLEX DEVELOPER #27-123
- MSDS: BDMTT
- Manufacturer: A M BRUNING
- Product Name: BRUNING COPYFLEX DEVELOPER #27-123
- National Stock Number: 6750-00-242-5613
Product Identification
Product ID:BRUNING COPYFLEX DEVELOPER #27-123
MSDS Date:01/01/1987
FSC:6750
NIIN:00-242-5613
MSDS Number: BDMTT
Responsible Party
Emergency Phone: (203)4535294X265
Cage: 1P308
Contractor
Telephone: 301-725-0104
Cage: 1P308
Ingredients
POTASSIUM TETRABORATE
Fraction By Weight: 70%.
POTASSIUM HYDROXIDE (SARA III)
CAS: 1310-58-3
RTECS: TT2100000
Fraction By Weight: 10%.
OSHA PEL C, 2 MG/M3
ACGIH TLV: C 2 MG/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
RESORCINOL (SARA III)
CAS: 108-46-3
RTECS: VG9625000
Fraction By Weight: 10%.
OSHA PEL 10 PPM/20 STEL
ACGIH TLV: 10 PPM/20 STEL; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
PHLOROGLUCINOL
CAS: 108-73-6
RTECS: SY1050000
Fraction By Weight: 10%.
Hazards
Effects of Overexposure:MAY CAUSE EYE INJURY,SKIN IRRITATION OR
DERMATITIS TO SENSITIVE INDIVIDUALS.
First Aid
First Aid:SKIN:WASH WITH SOAP & WATER/EYES:FLUSH WITH WATER;EXAMINATION
BY DR. SHOULD BE MADE ASAP.
Fire Fighting
Extinguishing Media:MFR DID NOT SUPPLY
Fire Fighting Procedures:MFR DID NOT SUPPLY
Unusual Fire/Explosion Hazard:MFR DID NOT SUPPLY
Accidental Release
Spill Release Procedures:DISCARD ANY BROKEN PACKAGES.SPILLED PWDR MAY
BE VACUUMED.SPILLED SOLN MAY BE MOPPED OR FLUSHED WITH WTR.
Handling
Handling and Storage Precautions:MFR DID NOT SPECIFY.
Exposure Controls
Respiratory Protection:NONE
Ventilation:LOCAL EXHAUST SHOULD BE USED WHEN DISSOLVING PKG.CONTENTS.
Protective Gloves:RUBBER
Eye Protection:MFR DID NOT SPECIFY
Other Protective Equipment:MFR DID NOT SPECIFY
Supplemental Safety and Health
UNDATED MSDS.
Chemical Properties
HCC:N1
Solubility in Water:APPRECIABLE
Appearance and Odor:OFF WHITE PWDRS IN PCKG/LIGHT AMBR WTR SOLN/NO ODR
Stability
Stability Indicator/Materials to Avoid:YES
CAN REACT WITH OXIDIZING MATERIALS.
Disposal
Waste Disposal Methods:DISPOSE OF IAW LOCAL,STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.