Product ID:PETROTECT 2,MIL-C-16173,GRADE 2
MSDS Date:01/01/1985
FSC:8030
NIIN:00-244-1297
MSDS Number: BDNBM

Emergency Phone: 800-245-3952

Info Phone: 800-245-3952

Cage: 86459

Telephone: 800-245-3952

Cage: 86459

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 36%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

Effects of Overexposure:EYE: BURN/IRRIT. SKIN: DEFATTING. VAPORS:
IRRIT,DIZZINESS,DROWSINESS,PNEUMONIA,COMA. INGEST: GI IRRT

First Aid:EYE: FLUSH WITH WATER 15 MIN,CALL PHYSICIAN. SKIN: WASH WITH
SOAP & WATER,REMOVE CONTAMINATED CLOTHES. INHALATION: REMOVE TO
FRESH AIR,GIVE ARTIF RESP IF NEEDED,CALL MD. INGESTION: DO NOT
INDUCE VOMIT ING,CALL A DOCTOR IMMEDIATELY.

Flash Point:100F/37C (ASTM)
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM,DRY CHEMICAL,CARBON DIOXIDE
Fire Fighting Procedures:TREAT AS OIL FIRE,WATER ONLY TO COOL EXPOSED
CONTAINERS
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHEN
BURNING.

Spill Release Procedures:SCRAPE UP MATERIAL INTO WASTE CONTAINERS,OR
ABSORB WITH DRY SAND OR OIL ABSORBENTS. CLEAN SPILL AREA WITH
DETERGENT SOLUTIONS OR SAFETY SOLVENTS. PROVIDE ADEQUATE
VENTILATION DURING CLEAN UP.

Handling and Storage Precautions:STORE IN SEALED CONTAINERS AWAY FROM
HEAT,OPEN FLAME,AND OXIDIZING MATERIALS.
Other Precautions:FIRE EXTINGUISHERS MUST BE KEPT READILY AVAILABLE &
PERSONNEL TRAINED IN PROPER USE.

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL/GENERAL
Protective Gloves:RUBBER SYNTH
Eye Protection:SPLASH PROOF GOGGLES
Other Protective Equipment:SYNTHETIC RUBBER PROTECTIVE
CLOTHING,BOOTS,APRON.
Supplemental Safety and Health
THE 50% DISTILLATION TEMPERATURE RANGES BETWEEN 330 TO
340F,TYPICALLY.PKG: 1 GAL CAN SOLVENT CONTAINS NO DETECTABLE
BENZENE (IE: <3 PPM)

HCC:F4
Boiling Pt:B.P. Text:310/154C
Vapor Pres:<1
Vapor Density:4.3
Spec Gravity:0.88
Evaporation Rate & Reference:<1 (EE)
Solubility in Water:EMULSIFIES
Appearance and Odor:VISCOUS,BROWN FLUID,PETROLEUM ODOR.
Percent Volatiles by Volume:36

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:DO,CO*2,SMOKE,SO*X

Waste Disposal Methods:WASTE MATERIALS SHOULD BE DUMPED OR BURIED IN AN
APPROVED INDUSTRIAL WASTE LANDFILL. LARGE QUANTITIES MAY BE
DISPOSED OF BY INCINERATION IN SUITABLE COMBUSTION CHAMBER.
DISPOSAL MUST COMPLY WITH ALL F EDERAL,STATE,AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.