BDNXG - SOAP SOLUTION
- MSDS: BDNXG
- Manufacturer: CHEMICAL COMMODITIES AGENCY INC
- Product Name: SOAP SOLUTION
- National Stock Number: 6810-00-252-1345
Product Identification
Product ID:SOAP SOLUTION
MSDS Date:01/01/1987
FSC:6810
NIIN:00-252-1345
MSDS Number: BDNXG
Responsible Party
HIGHLAND, CA 92346-2640
US
Emergency Phone: 714-864-2310
Info Phone: 714-864-2310
Cage: 60777
Contractor
Telephone: 909-864-2310
Cage: 60777
Ingredients
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 66.0%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
SOAP
ACGIH TLV: NOT SPECIFIED
Hazards
Effects of Overexposure:GIDDINESS
First Aid
First Aid:INHALATION: MOVE TO FRESH AIR. IF SWALLOWED, INDUCE VOMITING
& CALL PHYSICIAN. FLUSH SKIN & EYE CONTACT WITH WATER.
Fire Fighting
Flash Point:55F/12.8C(T.C.C)
Lower Limits:2.0
Upper Limits:12.0
Extinguishing Media:SMALL FIRES: CARBON DIOXIDE/DRY CHEMICAL; LARGE:
ALCOHOL FOA
Fire Fighting Procedures:DILUTION OF LIQUID WITH 22 TO 25 VOLUMES OF
WATER PUTS OUT
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. SMALL
SPILLS SHOULD BE FLUSHED WITH LARGE QUANTITIES OF WATER. LARGER
SPILLS SHOULD BE COLLECTED FOR DISPOSAL
Handling
Handling and Storage Precautions:COOL DRY AREA AWAY FROM HEAT, SPARKS &
OPEN FLAME
Exposure Controls
Respiratory Protection:AIR SUPPLIED MASKS IN CONFINED AREA
Ventilation:TO KEEP VAPOR CONCENTRATION BELOW TLV
Protective Gloves:RUBBER OR VINYL
Eye Protection:GOGGLES
Other Protective Equipment:EYE BATH & SAFETY SHOWER
Supplemental Safety and Health
MSDS DATED:02/04/87;ITEM CLASS C OF MIL-W-15000;FLASH POINT AS GIVEN IN
THIS MSDS 178,IS QUESTIONABLE;OLD DATA IS USED.
Chemical Properties
HCC:F2
Boiling Pt:=82.2C, 180.F
Vapor Pres:33
Vapor Density:2
Spec Gravity:0.7861
Evaporation Rate & Reference:2.3 (BU AC = 1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR LIQUID, MILD ODOR
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
ANHYDRIDE, ISOCYANATE, MONOMER & ORGANOMETALLIC CONTAMINATES
Stability Condition to Avoid:AVOID HEAT, SPARKS & OPEN FLAME
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON MONOXIDE
&/OR CARBON DIOXIDE
Disposal
Waste Disposal Methods:ATOMIZE INTO AN INCINERATOR WHERE PERMITTED
UNDER APPROPRIATE FEDERAL, STATE, & LOCAL REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.