BDRMJ - SILICONE FLUID ST-22(100)

  • MSDS: BDRMJ
  • Manufacturer: SIL TECH CORP
  • Product Name: SILICONE FLUID ST-22(100)
  • National Stock Number: 9150-00-269-8246
Product Identification

Product ID:SILICONE FLUID ST-22(100)
MSDS Date:01/01/1987
FSC:9150
NIIN:00-269-8246
MSDS Number: BDRMJ

Responsible Party
SIL-TECH CORPORATION

Emergency Phone: (517) 423-3113

Cage: 4Y322

Contractor
SIL-TECH CORPORATION
TECUMSEH, MI 49286-0177 US

Telephone: 517-423-3113

Cage: 4Y322

Ingredients

POLYDIMETHYLSILOXANE; CAS #9016-00-6

CAS: 9016-00-6

RTECS: TQ2690000

Fraction By Weight: 100%

Hazards

Effects of Overexposure:NONE NOTED BY MFR. LOW TOXICITY & LOW HAZARD TO
HEALTH.

First Aid

First Aid:SKIN:WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER.
INHALED: REMOVE TO FRESH AIR. REMOVE CONTAMINATED CLOTHING.

Fire Fighting

Flash Point:>300C/>572F-COC
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES,VENTILATE AREA
WELL.ABSORB WITH VERMICULITE OR OTHER MATERIALS, SUCH AS
SAWDUST,RAGS,PAPER & PLACE IN CLOSED CONTAINER. USE NON SPARKING
TOOLS. WEAR PROPER PROTECTIVE EQUIPMENT DURING CLEAN UP.

Handling

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
CONTAINERS TIGHTLY CLOSED
Other Precautions:NONE NOTED.

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SAFETY SHOWER & EYE BATH
Supplemental Safety and Health
MSDS NOT DATED; SPEC REFERENCE: VV-D-1078B, VISCOSITY GRADE:100CST.

Chemical Properties

HCC:V6
Spec Gravity:0.966
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR,COLORLESS,ODORLESS LIQ

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID ELEVATED TEMPATURES. CORR MATL. OXID
MATLS.
Hazardous Decomposition Products:INCOMPLETELY BURNED CARBON PRODUCTS,
CO*2, CO.

Disposal

Waste Disposal Methods:INCINERATE IN APPROVED INCINERATOR OR DISPOSE OF
IN APPROVED CHEMICAL DUMP IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.