BDTYM - ST-22 (200,000) POLYDIMETHYLSILOXANE
- MSDS: BDTYM
- Manufacturer: SIL TECH CORP
- Product Name: ST-22 (200,000) POLYDIMETHYLSILOXANE
- National Stock Number: 9150-00-286-8088
Product Identification
Product ID:ST-22 (200,000) POLYDIMETHYLSILOXANE
MSDS Date:05/02/1990
FSC:9150
NIIN:00-286-8088
MSDS Number: BDTYM
Responsible Party
TECUMSEH, MI 49286-0177
US
Emergency Phone: 517-423-3113
Info Phone: 517-423-3113
Cage: 4Y322
Contractor
Telephone: 517-423-3113
Cage: 4Y322
Ingredients
POLYDIMETHYLSILOXANE
CAS: 9016-00-6
RTECS: TQ2690000
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE & CHRONIC:NO EVIDENCE OF ADVERSE
FROM AVAILABLE INFORMATION.
Effects of Overexposure:NO ADVERSE EFFECTS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION:REMOVE TO FRESH AIR.EYES:IMMEDIATELY FLUSH WITH
PLENTY OF WATER FOR 15 MINUTES HOLDING EYELIDS OPEN. GET MEDICAL
ATTENTION. SKIN:WASH WITH WATER.
Fire Fighting
Flash Point Method:PMCC
Flash Point:601F,316C
Extinguishing Media:USE CARBON DIOXIDE, ALCOHOL FOAM, OR DRY
CHEMICAL.DO NOT SPRAY A SOLID STREAM OF WATER DIRECTLY INTO BURNING
LIQUID.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:FLOATING FIRE HAZARD
Accidental Release
Spill Release Procedures:COLLECT FOR PROPER DISPOSAL.
Neutralizing Agent:NOT APPLICABLE.
Handling
Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED WHEN
NOT IN USE.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID CONTACT WITH EYES.
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:MECHANICAL
Protective Gloves:PVC
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER,WORK
CLOTHING AND APRON AS REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. DO NOT WEAR CONTAMINATED CLOTHING OR
FOOTWEAR.
Supplemental Safety and Health
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:392F,200C
Vapor Pres:1 MAX
Vapor Density:1 MIN
Spec Gravity:0.969 - 0.977
Evaporation Rate & Reference:1 MAX (N-BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID, SLIGHT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
OXIDES OF SILICON
Disposal
Waste Disposal Methods:BURY IN LAND FILL WHERE PERMITTED UNDER
APPROPRIATE FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.