BDYJH - PC12-007M, PART A

  • MSDS: BDYJH
  • Manufacturer: HYSOL DIV THE DEXTER CORP
  • Product Name: PC12-007M, PART A
  • National Stock Number: 5970-00-418-1922
Product Identification

Product ID:PC12-007M, PART A
MSDS Date:12/10/1986
FSC:5970
NIIN:00-418-1922
Kit Part:Y
MSDS Number: BDYJH

Responsible Party
HYSOL DIVISION, THE DEXTER CORPORATION
211 FRANKLIN STREET
OLEAN, NY 14760

Emergency Phone: 716-372-6309

Info Phone: 716-372-6300

Preparer: JAMES P HORNBURG

Cage: 14347

Contractor
HYSOL DIVISION, THE DEXTER CORPORATION
312 OLEAN, NY 14760-1297 US

Telephone: 716-372-6300/6309

Cage: 14347

Ingredients

N-BUTYL GLYCIDYL ETHER (BGE)

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: 1-15%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9293


N-BUTYL GLYCIDYL ETHER (BGE)

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: 6.612%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9394

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: MODERATELY IRRITATING,
BUT A POSITIVE SENSITIZER. ANIMAL MUTAGEN. INHALATION: MILDLY
IRRITATING TO RESPIRATORY PASSAGES. INGESTION: IRRITATING.
Medical Cond Aggravated by Exposure:NONE NOTED.

First Aid

First Aid:EYES: FLUSH WITH WATER IMMEDIATELY FOR 15 MINUTES. SKIN: WASH
IMMEDIATELY WITH SOAP AND WATER. INGESTION: GIVE LARGE AMOUNTS OF
WATER OR MILK AND INDUCE VOMIT. GET MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:TCC
Flash Point:155F(68C)
Extinguishing Media:SMALL FIRES: CO*2 OR DRY CHEMICAL. FOR LARGE FIRES:
FOAM (ALCOHOL, POLYMER OR ORDINARY).
Fire Fighting Procedures:NONE-AVOID BREATHING VAPORS. WEAR SCBA IF
NECESSARY.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:COVER WITH ABSORBENT MATERIAL. THEN SHOVEL
INTO WASTE CONTAINER. IF SPILL AREA IS TO BE SOLVENT RINSED TO
REMOVE STICKNESS, BE AWARE OF SOLVENT VAPOR HAZARDS.

Handling

Handling and Storage Precautions:STORE IN A DRY AREA. AVOID SKIN
CONTACT.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED CANNISTER MASK OR AIR HOSE
MASK.
Ventilation:MECHANICAL (GENERAL) OR LOCAL EXHAUST THAT WILL KEEP
CONCENTRATION BELOW TLV.
Protective Gloves:RUBBER OR PLASTIC.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:COVERALLS OR APRON.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
WASTE MATERIAL IS NOT A HAZARDOUS WASTE UNDER RCRA. THIS IS PART A OF A
2 PART PRODUCT. FOR PART B, SEE PNI B, SAME NSN. KEY 1: F8

Chemical Properties

HCC:V4
Spec Gravity:1.08
Evaporation Rate & Reference:>1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER, MEDIUM VISCOSITY LIQUID, VERY SLIGHT
CHARACTERISTIC ODOR.
Percent Volatiles by Volume:8

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTAMINATION WITH ALKALIES, ACIDS, AMINES AND WATER.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, ALDEHYDES, ACIDS AND OTHER ORGANIC
COMPOUNDS.
Conditions to Avoid Polymerization:EXOTHERMIC CURE MAY OCCUR WHEN LARGE
QUANTITIES ARE MIXED WITH CURING AGENT.

Disposal

Waste Disposal Methods:CONTROLLED INCINERATION OR PUT INTO METAL
CONTAINERS FOR LANDFILL BURIAL. NY STATE DOES NOT PERMIT LANDFILL
BURIAL OF LIQUIDS.SOLIDIFY BY MIXING WITH HARDENER BEFORE LANDFILL.
COMPLY WITH ALL APPLICAB LE FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.