BDYKH - TRIBOLUBE-3 AND TRIBOLUBE-5
- MSDS: BDYKH
- Manufacturer: AEROSPACE LUBRICANTS INC
- Product Name: TRIBOLUBE-3 AND TRIBOLUBE-5
- National Stock Number: 9150-00-419-0628
Product Identification
Product ID:TRIBOLUBE-3 AND TRIBOLUBE-5
MSDS Date:01/01/1987
FSC:9150
NIIN:00-419-0628
MSDS Number: BDYKH
Responsible Party
Emergency Phone: 614-291-3045
Cage: 66164
Contractor
Telephone: 614-878-3600
Cage: 66164
Ingredients
SYNTHETIC GREASE
Fraction By Weight: >99%
ACGIH TLV: NOT SPECIFIED
Hazards
Effects of Overexposure:MAY IRRITATE EYES AND SKIN ON PROLONGED SKIN
CONTACT.
First Aid
First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.
Fire Fighting
Flash Point:>450F/232C
Extinguishing Media:CO*2,DRY CHEMICAL,FOAM,WATER SPRAY.
Fire Fighting Procedures:AVOID BREATHING SMOKE.USE WATER TO COOL
CONTRS;USE SCBA.
Unusual Fire/Explosion Hazard:AVOID HEAT;FLAMES,CAN REACT WITH
OXIDIZING AGENT.
Accidental Release
Spill Release Procedures:USE PROPER PERSONAL PROTECTION;USE ABSORBENT
MATERIAL OR WIPE UP;RECOVER FOR PROPER DISPOSAL.
Handling
Handling and Storage Precautions:STORE AT ROOM TEMPERATURE. KEEP
CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES.
Exposure Controls
Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:NO SPECIAL REQUIREMENTS W ADEQUATE VENT.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED TO PREVENT PROLONGED CONTACT.
Supplemental Safety and Health
MSDS UNDATED
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>500F/260C
Spec Gravity:0.9
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TAN COLOR GREASE.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENT
Stability Condition to Avoid:HEAT AND OPEN FLAMES
Hazardous Decomposition Products:ON BURNING;CO AND CO*2.
Disposal
Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.