Product ID:TT-E-508C
MSDS Date:01/01/1985
FSC:8010
NIIN:00-577-4129
MSDS Number: BFFTK

DURON, INC.

10406 TUCKER ST
BELTSVILLE, MD 20705-2201
US

Cage: LO183

DURON, INC.

BELTSVILLE, MD 20705-4600 US

Telephone: 301-937-4600

Cage: LO183

PIGMENTS (PIGMENTS CONSIST OF SILICATES RED OXIDE,TITANIUM

Fraction By Weight: 46.1%

ALKYD RESIN

Fraction By Weight: 25.5%

MINERAL SPIRITS (EXEMPT)

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 28.0%

ACGIH TLV: 100 PPM

DRIERS

Fraction By Weight: 0.4%

Effects of Overexposure:IRRIT. OF RESPIRATORY TRACT & ETES.INHAL. OF
HIGH VAP CONCENTRATS MAY HAVE RESULTS RANGING FR DIZZIN

First Aid:EYES-FLUSH W/WATER FOR 15 MIN.-GET MEDICAL ATTN. IF OVERCOME
BY VAPOR, REMOVE FROM EXPOSED AREA. IF BREATHING IS IRREGULAR OR
STOPPED, START RESUSCITATION.

Flash Point:104 F TCC 40 C
Extinguishing Media:USE CARBON DIOXIDE, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:FIGHT LIKE A GASOLINE FLASH FIRE.
Unusual Fire/Explosion Hazard:EXPOSURE TO EXTREME HEAT MAY CAUSE
BURSTING FO CLOSED CONTAINERS.

Spill Release Procedures:REMOVE ALL IGNITION SOURCES.KEEP PEOPLE
AWAY.RECOVER LIQUID ADD ABSORBENT TO SPILL AREA. AVOID BREATHING
VAPORS. VENTILATE ENCL SPACES.KEEP PETROLEUM PRODUCTS OUT OR ALL
PUBLIC SEWER & STREAMS.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
FLAME.
Other Precautions:AVOID PROLONGED CONTACT W/SKIN.DO NOT TAKE
INTERNALLY.

Respiratory Protection:HYDROCARBON OR ORGANIC VAP CANISTER.SELF-CNTND
APPARAT ABOVE TLV
Ventilation:FACE VELOCITY 60 FPM
Protective Gloves:HYDROCARB INSOL
Eye Protection:SAFETY GOGGLES OR GLASSES
Other Protective Equipment:MUST COMPLY W/SECTIONS 1910.132-135 OSHA
STNDS
Supplemental Safety and Health

HCC:F4
Vapor Density:HEAV
Spec Gravity:1.327
Appearance and Odor:LIQUID PAINT - MILD ODOR
Percent Volatiles by Volume:49.3

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:STRONG OXIDANTS LIKE LIQUID CHLORINE &
CONCENTRATED OXYG HI
Hazardous Decomposition Products:CARBON MONOXIDE IN THE CASE OF
INCOMPLETE COMBUSTION

Waste Disposal Methods:PLACE IN CLOSED DOT APPRVD CONTAINER. RAGS &
ABSORBENT MATERIAL SHOULD BE IMMED. IMMERSED IN WATER.USE APPROVED
LANDFILL IN ACCORDANCE W/LOCAL,STATE & FED REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.