BFGBV - TT-E-508C

  • MSDS: BFGBV
  • Manufacturer: DURON INC
  • Product Name: TT-E-508C
  • National Stock Number: 8010-00-579-9200
Product Identification

Product ID:TT-E-508C
MSDS Date:01/01/1985
FSC:8010
NIIN:00-579-9200
MSDS Number: BFGBV

Responsible Party
DURON, INC.
10406 TUCKER ST
BELTSVILLE, MD 20705-2201
US

Cage: LO183

Contractor
DURON, INC.
BELTSVILLE, MD 20705-4600 US

Telephone: 301-937-4600

Cage: LO183

Ingredients

TITANIUM DIOXIDE SILICATES CALCIUM CARBONATE

Fraction By Weight: 46.6%


ALKYD RESIN (SOLIDS)

Fraction By Weight: 24.2%


MINERAL SPIRITS (EXEMPT)

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 28.9%

ACGIH TLV: 100PPM


DRIERS

Fraction By Weight: 0.3%

Hazards

Effects of Overexposure:IRRIT OF RESPIRATORY TRACT & EYES.INHAL OF HIGH
VAP CONCENTRATE MAY HAVE RESULTS RANGING FR DIZZINES

First Aid

First Aid:EYES-FLUSH W/WATER FOR 15 MINUTES-GET MEDICAL ATTN.IF
OVERCOME BY VAP, REMOVE FROM EXPOSED AREA. IF BREATHING IS
IRREGULAR OR STOPPED, START RESUSCITATION.

Fire Fighting

Flash Point:104F TCC 40 C
Lower Limits:0.9
Extinguishing Media:USE CARBON DIOIXIDE, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:FIGHT LIKE A GASOLINE FLASH FIRE
Unusual Fire/Explosion Hazard:EXPOSURE TO EXTREME HEAT MAY CAUSE
BURSTING OF CLOSED CONTAINERS.

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES,KEEP PEOPLE AWAY.
RECOVER LIQ ADD ABSORBENT TO SPILL AREA. AVOID BREATHING VAPORS.
VENTILATE ENCLOSED SPACES.KEEP PETROLEUM PRODUCTS OUT OF ALL PUBLIC
SEWER & STREAM.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS AND OPEN
FLAME.
Other Precautions:AVOID PROLONGED CONTACT W/SKIN. "DO NOT TAKE
INTERNALLY".

Exposure Controls

Respiratory Protection:HYDROCARBON OR ORGANIC VAP CANISTERS.
SELF-CONTAINED APPARAT ABOVE T
Ventilation:FACE VELOCITY 60 FPM
Protective Gloves:RBBR OR PLASTIC
Eye Protection:SAFETY GLASSES OR GOGLES.
Other Protective Equipment:MUST COMPLY W/SECTION 1910,132-135 OSHA
STDS.
Supplemental Safety and Health

Chemical Properties

Spec Gravity:1.327
Appearance and Odor:LIQUID PAINT-MILD ODOR
Percent Volatiles by Volume:49.3

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:STRONG OXIDANTS LIKE LIQ CHLORINE &
CONCENTRA OXYG HIGH TEMP
Conditions to Avoid Polymerization:CARBON MONOXIDE IN THE CASE OF
INCOMPLETE COMBUSTION.

Disposal

Waste Disposal Methods:PLACE IN CLOSED DOT APPROVD CONTAINER.RAGS &
ABSORBENT MATERIAL SHD BE IMMED IMMERSED IN WATER.USE APPRVD
LANDFILL IN ACCORDANCE W/LOCAL STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.