Product ID:TT-E-508C
MSDS Date:01/01/1985
FSC:8010
NIIN:00-597-8195
MSDS Number: BFHCL

DURON, INC.

10406 TUCKER ST
BELTSVILLE, MD 20705-2201
US

Cage: LO183

DURON, INC.

BELTSVILLE, MD 20705-4600 US

Telephone: 301-937-4600

Cage: LO183

TITANIUM DIOXIDES SILICATES CALCIUM CARBONATE

Fraction By Weight: 48.6%

ALKYD RESIN (SOLIDS)

Fraction By Weight: 23.0%

MINERAL SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 28.1%

ACGIH TLV: 100 PPM

DRIERS

Fraction By Weight: 0.3%

Effects of Overexposure:IRRIT OF RESPIRATORY TRACT & EYES.INHAL. OF
HIGH VAPOR CONCENTRATIONS MAY HAVE RESULTS RANGING FROM

First Aid:EYES-FLUSH W/WATER FOR 15 MIN-GET MEDICAL ATTN.IF OVERCOME BY
VAPOR, REMOVE FROM EXPOSED AREA.IF BREATHING IS IRREGULAR OR
STOPPED,START RESUSCITATION.

Flash Point:104F TCC 40 C
Lower Limits:0.9%
Extinguishing Media:USE CARBON DIOXIDE,DRY CHEMICAL OR FOAM
Fire Fighting Procedures:FIGHT LIKE A GASOLINE FLASH FIRE
Unusual Fire/Explosion Hazard:EXPOSURE TO EXTREME HEAT MAY CAUSE
BURSTING OF CLOSED CONTAINERS.

Spill Release Procedures:REMOVE ALL IGNITION SOURCES,KEEP PEOPLE
AWAY.RECOVER LIQ.,ADD ABSORBENT TO SPILL AREA.AVOID BREATHING
VAPORS. VENTILATE ENCLOSED SPACES.KEEP PETROLEUM PRODUCTS OUT OF
ALL PUBLIC SEWER & STREAM.

Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS,AND OPEN
FLAME.
Other Precautions:AVOID PROLONGED CONTACT W/SKIN. DO NOT TAKE
INTERNALLY.

Respiratory Protection:HYDROCARBON OR ORGANIC VAPOR CANISTERS.SELF
CNTNG APPARATUS ABOV
Ventilation:LOC. EXHAUST-FACE 60 FPM
Protective Gloves:MUST COMPLY W/S
Eye Protection:ECTION 1910,132-.135 OSHA
Other Protective Equipment:STDS.
Supplemental Safety and Health
EFFECTS OF OVEREXPOSURE(CONTD)DIZZINESS AND HEADACHES TO
UNCONSCIOUSNESS.

Vapor Density:HEAV
Spec Gravity:1.369
Appearance and Odor:LIQUID PAINT-MILD ODOR
Percent Volatiles by Volume:48.9

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:STRONG OXIDANTS LIKE LIQ. CHLORINE &
CONCENTRATED OXYGEN HIG
Hazardous Decomposition Products:CARBON MONOXIDE IN THE CASE OF
COMBUSTION

Waste Disposal Methods:PLACE IN CLOSED DOT APPRVD CONTAINER.RAGS &
ABSORBENT MATERIAL SHD BE IMMED.IMMERSED IN WATER.USE APPROVED
LANDFILL IN ACCORD. W/LOCAL STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.