Product ID:TT-E-508C
MSDS Date:01/01/1987
FSC:8010
NIIN:00-616-0008
MSDS Number: BFHXN

DURON, INC.

10406 TUCKER ST
BELTSVILLE, MD 20705-2201
US

Cage: LO183

DURON, INC.

BELTSVILLE, MD 20705-4600 US

Telephone: 301-937-4600

Cage: LO183

TITANIUM DIOXIDE SILICATES CALCIUM CARBONATE

Fraction By Weight: 46.6%

ALKYD RESIN (SOLIDS)

MINERAL SPIRITS (EXEMPT)

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 28.9%

DRIERS

Fraction By Weight: 0.3%

Effects of Overexposure:IRRIT OF RESPIRATOR TRACT & EYES.INHAL OF HIGH
VAP CAONCENTR.MAY HAVE RESULTS RANGING FR DIZZINESS &

First Aid:EYES-FLUSH FOR 15 MIN-GET MEDICAL ATTN.IF OVERCOME BY VAPOR,
REMOVE FROM EXPOSED AREA. IF BREATHING IR IRREGULAR OR
STOPPED,START RESUSCITATION.

Flash Point:104 F TCC 40 C
Lower Limits:0.9
Extinguishing Media:USE CARBON DIOXIDE,DRY CHEMICAL OR FOAM
Fire Fighting Procedures:FIGHT LIKE A GASOLINE FLASH FIRE
Unusual Fire/Explosion Hazard:EXPOSURE TO EXTREME HEAT MAY CAUSE
BURSTING OF CLOSED CONTAINERS

Spill Release Procedures:REMOVE ALL IGNITION SOURCES,KEEP PEOPLE
AWAY.RECOVER LIQUID ADD ABSORBENT TO SPILL AREA.AVOID BREATHING
VAPORS.VENTILATE ENCLOSED SPACES.KEEP PETROLEUM PRODUCTS OUT OF ALL
PUBLIC SEWER & STREAM.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND OPEN
FLAME.
Other Precautions:AVOID PROLONGED CONTACT W/SKIN.DO NOT TAKE
INTERNALLY.

Respiratory Protection:HYDROCARBON OR ORGANIC VAP CANISTERS.SELF
CONTAIN APPARATUS ABOV TLV
Ventilation:LOCAL EXH-FACE VELOCITY 60 FPM
Protective Gloves:RBBR OR PLASTIC
Eye Protection:SAFETY GOGGLES OR GLASSES
Other Protective Equipment:MUST COMPLY W/SECTION 1910,142.135 OSHA STDS
Supplemental Safety and Health

HCC:F4
Vapor Density:HEAV
Spec Gravity:1.327
Percent Volatiles by Volume:49.3

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:STRONG OXIDANTS LIKE LIQ CHLORINAE &
CONCENTR OXYG HIGH TEMP
Hazardous Decomposition Products:CARBON MONOXIDE IN THE CASE OF
INCOMPLETE COMBUSTION

Waste Disposal Methods:PLACE IN CLOSED DOT APPROVED CONTAINER.RAGS &
ABSORBENT MATERIAL SHD BE IMMEDIATELY IMMERSED IN WATER.USE APPRVED
LANDFILL IN ACCORDANCE W/LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.