Product ID:TT-E-508C
MSDS Date:01/01/1987
FSC:8010
NIIN:00-616-0014
MSDS Number: BFHXS

DURON,INC

10406 TUCKER ST
BELTSVILLE, MD 20705-2201
US

Cage: HO323

DURON,INC

BELTSVILLE, MD 20705 US

Telephone: 301-937-4600

Cage: HO323

TITANIUM DIOXIDE SILICATES CALCIUM CARBONATE

Fraction By Weight: 46.6%

ALKYD RESIN (SOLIDS)

Fraction By Weight: 24.2%

MINERAL SPIRITS (EXEMPT)

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 28.9%

DRIERS

Fraction By Weight: 0.3%

Effects of Overexposure:IRRIT OF RESPIRATORY TRACT & EYES.INHAL OF HIGH
VAP CONCENTRAT MAY HAVE RESULTS RANGING FR DIZZINESS

First Aid:EYES-FLUSH W/WATER FOR 15 MIN.-GET MEDICAL ATTENTION.IF
OVERCOME BY VAPOR,REMOVE FROM EXPOSED AREA.IF BREATHING IS
IRREGULAR OR STOPPED,STOPPED START RESUSCITATION.

Flash Point:104F TCC 40C
Lower Limits:0.9%
Extinguishing Media:USE CARBON DIOXIDE,DRY CHEMICAL OR FOAM
Fire Fighting Procedures:FIGHT LIKE A GASOLINE FLASH FIRE
Unusual Fire/Explosion Hazard:EXPOSURE TO EXTREME HEAT MAY CAUSE
BURSTING OF CLOSED CONTAINERS.

Spill Release Procedures:REMOVE ALL IGNITION SOURCES,KEEP PEOPLE
AWAY.RECOVER LIQ.ADD ABSORBENT TO SPILL AREA.AVOID BREATHING
VAPORS.VENTILATE ENCL SPACES.KEEP PETROLEUM PRODUCTS OUT OF ALL
PUBLIC SEWER AND STREAM.

Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS AND OPEN
FLAME.
Other Precautions:AVOID PROLONGED CONTACT W/SKIN.DO NOT TAKE
INTERNALLY.

Respiratory Protection:HYDROCARBON OR ORGANIC VAP
CANISTERS.SELF-CONTAINED APPARAT ABOVE TL
Ventilation:FACE VELOCITY 60 FPM
Protective Gloves:HYDROCARBON INS
Eye Protection:SAFETY GOGGLES OR GLASSES
Other Protective Equipment:MUST COMPLY W/SECTION 1910,132-.135 OSHA
STDS.
Supplemental Safety and Health

HCC:F4
Vapor Density:HEAV
Spec Gravity:1.327
Solubility in Water:NONE
Appearance and Odor:LIQUID PAINT-MILD ODOR
Percent Volatiles by Volume:49.3

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:STRG OXIDANTS LIKE LIQ CHLORINE &
CONCENTRATED OXYG HIGH TEM
Hazardous Decomposition Products:CARBON MONOXIDE IN THE CASE OF
INCOMPLETE COMBUSTION

Waste Disposal Methods:PLACE IN CLOSED DOT APPRV'D CONTAINER.RAGS &
ABSORBENT MATERIAL SHD BE IMMEDIATELY IMMERSED IN WATER.USE APPRV'D
LANDFILL IN ACCORDANCE W/LOC,STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.