BFKHV - SILICONE FLUID ST-22(10)

  • MSDS: BFKHV
  • Manufacturer: SIL TECH CORP
  • Product Name: SILICONE FLUID ST-22(10)
  • National Stock Number: 9150-00-664-0111
Product Identification

Product ID:SILICONE FLUID ST-22(10)
MSDS Date:01/01/1987
FSC:9150
NIIN:00-664-0111
MSDS Number: BFKHV

Responsible Party
SIL-TECH CORPORATION

Emergency Phone: 517 423 3113

Cage: 4Y322

Contractor
SIL-TECH CORPORATION
TECUMSEH, MI 49286-0177 US

Telephone: 517-423-3113

Cage: 4Y322

Ingredients

POLYDIMETHYLSILOXANE(SILICONE FLUID); TLV IS FOR OIL MIST

CAS: 9016-00-6

RTECS: TQ2690000

Fraction By Weight: 100%.

ACGIH TLV: 5 MG/CUM (MIST)

Hazards

Effects of Overexposure:TOXICITY AND IRRITATION CONSIDERED TO BE
LOW.MAY IRRITATE EYES AND SKIN.USE PERSONAL PROTECTION.

First Aid

First Aid:SKIN:WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER.
INHALED: REMOVE TO FRESH AIR. REMOVE CONTAMINATED CLOTHING.

Fire Fighting

Flash Point:253F/123C (PMCC)
Extinguishing Media:WATER SPRAY,FOAM,CO*2,DRY CHEMICAL
Fire Fighting Procedures:NONE SPECIFIED.USE SCBA IN FIRES AND IN
CONFINED AREA.
Unusual Fire/Explosion Hazard:NONE SPECIFIED. USE REASONABLE CARE.

Accidental Release

Spill Release Procedures:USE PROPER PERSONAL PROTECTION. ABSORB AND
COLLECT FOR PROPER DISPOSAL

Handling

Handling and Storage Precautions:STORE IN COOL,DRY AND WELL VENTILATED
AREA. KEEP CONTAINER TIGHTLY CLOSED,WHEN NOT IN USE.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES.DO NOT USE
CONTAMINATED CLOTHES.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR OIL MIST IF
NEEDED.
Ventilation:MECHANICAL (GENERAL) RECOMMENDED
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:SAFETY SHOWER & EYE BATH
Supplemental Safety and Health
MSDS FROM SL-TECH IS NOT DATED.

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:NOT LISTED
Vapor Pres:U/K
Spec Gravity:0.935
Viscosity:10 CST @ 77F
Evaporation Rate & Reference:U/K
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR,COLORLESS,ODORLESS LIQUID.
Percent Volatiles by Volume:NEGL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED
Hazardous Decomposition Products:NONE SPECIFIED; EXPECT OXIDES OF
CARBON & SILICONE.

Disposal

Waste Disposal Methods:INCINERATE OR BURY ACCORDING TO LOCAL,STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.