Product ID:DYNALOY 1931, PART A
MSDS Date:01/01/1987
FSC:8040
NIIN:00-728-2887
Kit Part:Y
MSDS Number: BFMQS

DYNALOY INC.

Emergency Phone: 201 - 887-9270

Cage: HO162

DYNALOY, INC.

INDIANAPOLIS, IN 46203 US

Telephone: 317-788-9925;703-527-3887

Cage: 27908

EPOXY RESIN, CAS#25068-38-6 ,(RANGE 30-40%)

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 35%

EXPOXY DILUENT

Fraction By Weight: 5%

SILVER CAS#7440-22-4, RANGE 65-70%

RTECS: VU3500000

Fraction By Weight: 67.5%

MFR. NOTES THAT THIS PART HAS <8PPM EPICHLOROHYDRIN

RTECS: 9999999ZZ

Effects of Overexposure:SKIN/EYES: MAY CAUSE IRRITATION, AND
SENSITIZATION AFTER KREPEATED CONTACT.

First Aid:SKIN:WASH IMMEDIATELY WITH SOAP & WATER,EYES: FLUSH W/WATER
FOR 15 MINUTES, SEEK MEDICAL ATTN. IMMEDIATELY.

Flash Point:>200F/>93.3
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER SPRAY
Fire Fighting Procedures:USE WATER TO COOL FIRE EXPSD CONTRS; WEAR
SCBA,PROTECT.CLTHG
Unusual Fire/Explosion Hazard:MFR. REPORTS "NONE"

Spill Release Procedures:WEAR APPROPRIATE PROTECTIVE CLOTHING; ABSORB
WITH INERT MATERIAL (E.G.; SAND, VERMICULITE, ETC.), AND PUT IN AN
APPROVED DISPOSAL CONTAINER.

Handling and Storage Precautions:PRACTICE GOOD CAUTDON & PERSONAL
CLEANLINESS TO AVOID SKIN & EYE CONTACT. AVOID BREATHING VAPORS OF
HEATED MATERIAL.
Other Precautions:THOROUGHLY LAUNDER CONTAMINATED CLOTHING BEFORE
REUSING.

Respiratory Protection:NIOSH APPRVD ORGANIC VAPOR RESPIRATOR WITH
INADEQUATE VENTILATION
Ventilation:LOCAL EXHAUST OR GEN.MECH. VENTILATION TO MAINTAIN
CONC.Protective Gloves:IMPERVIOUS TYPE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SAFETY SHOWER, EYE BATH & WORK APRON
Supplemental Safety and Health
MSDS DATE:UNDATED

HCC:N1
Boiling Pt:B.P. Text:>200F/>
Vapor Density:71
Appearance and Odor:SILVER PASTE LIKE MATERIAL

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES, AMINES, MERCAPTANS
Stability Condition to Avoid:HIGH TEMPERATURES
Hazardous Decomposition Products:CO, CO*2, OXIDES O NITROGENS
Conditions to Avoid Polymerization:EXCESS HEAT

Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN AN APPROVED
LANDFILL IAW FEDERAL,STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.