BFNSL - GUM CAMPHOR

  • MSDS: BFNSL
  • Manufacturer: SHAPE PRODUCTS CO
  • Product Name: GUM CAMPHOR
  • National Stock Number: 6810-00-763-4397
Product Identification

Product ID:GUM CAMPHOR
MSDS Date:01/01/1987
FSC:6810
NIIN:00-763-4397
MSDS Number: BFNSL

Responsible Party
SHAPE PRODUCTS CO.
1127 57TH AVE.
OAKLAND, CA 94621-4427
US

Emergency Phone: 415-534-1186

Info Phone: 415-534-1186

Cage: DO984

Contractor
SHAPE PRODUCTS CO.
OAKLAND, CA 94621-4427 US

Telephone: 415-534-1186

Cage: DO984

Ingredients

CAMPHOR, SYNTHETIC

CAS: 76-22-2

RTECS: EX1225000

Fraction By Weight: 100%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3/3 STEL; 9192

Hazards

Effects of Overexposure:IRRITANT TO EYES.MUC
MEMBRANE,NAUSEA,VOMITING,DIZZINESS.MAY CAUSE SKIN IRRITATION.

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Fire Fighting

Flash Point:150F
Lower Limits:0.6
Upper Limits:3.5
Extinguishing Media:FOAM.DRY CHEMICAL
Fire Fighting Procedures:VAPORS CAUSE ONLY MODERATE RISK.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY THE MFR.

Accidental Release

Spill Release Procedures:USE PROPER PERSONAL PROTECTIVE EQUIPMENT.CAN
BE DISPOSE AS SOLID WASTE.

Handling

Handling and Storage Precautions:KEEP COOL AND IN DRY PLACE.AVOID
OXIDIZING MATERIALS.
Other Precautions:AVOID SKIN AND EYES CONTACT.DO NOT INHAL VAPORS.

Exposure Controls

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED TO PREVENT PROLONGED CONTACT.
Supplemental Safety and Health
MSDS UNDATED

Chemical Properties

HCC:F8
Boiling Pt:B.P. Text:399F
Vapor Density:5.24
Spec Gravity:0.992
Solubility in Water:SLIGHT
Appearance and Odor:WHITE TRANSLUSCENT SQUARES PENETRATING ODOR.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS,CHROMIC ANHYDRIDE.
Stability Condition to Avoid:OXIDIZING MATERIALS
Hazardous Decomposition Products:NONE SPECIFIED BY THE MFR.

Disposal

Waste Disposal Methods:CONSULT LOCAL AUTHORITIES.DISPOSAL MUST BE IN
ACCORDANCE WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.