BFPHN - ROYCO 808
- MSDS: BFPHN
- Manufacturer: ROYAL LUBRICANTS CO INC
- Product Name: ROYCO 808
- National Stock Number: 9150-00-782-2679
Product Identification
Product ID:ROYCO 808
MSDS Date:01/01/1987
FSC:9150
NIIN:00-782-2679
MSDS Number: BFPHN
Responsible Party
Emergency Phone: (201)887-7410
Cage: 07950
Contractor
Telephone: 973-887-7411/7410
Cage: 07950
Ingredients
SYNTHETIC ESTER AND OTHER COMPONENTS
Fraction By Weight: 100%
Hazards
Effects of
Overexposure:EYES:IRRITATION;SKIN:IRRITATION;INHAL:RESPIRATORY
TRACT IRRITATION;INGEST:G.I.DISTURBANCES.DIARRHEA.
First Aid
First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.
Fire Fighting
Flash Point:400F/204 (COC)
Extinguishing Media:CO*2,DRY CHEMICAL POWDER,FOAM ;DO NOT USE WATER
JET.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED
AREA.
Unusual Fire/Explosion Hazard:NONE SPECIFIED, USE REASONABLE CARE.
Accidental Release
Spill Release Procedures:USE PROPER PERSONAL PROTECTION;USE SUITABLE
ABSORBENT MATERIAL AND RECOVER FOR PROPER DISPOSAL.
Handling
Handling and Storage Precautions:STORE IN A COOL,DRY AND WELL
VENTILATED AREA;KEEP AWAY FROM OPEN FLAMES AND HIGH TEMPERATURES.
Other Precautions:AVOID CONTACT WITH EYES AND SKIN;DO NOT BREATHE
VAPORS/MIST;WASH THOROUGHLY AFTER EACH USE.DO NOT USE CONTAMINATED
CLOTHES.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
VAPORS/MIST IF > TLV.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:NEOPRENE
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
MSDS DATED:NOVEMBER 1,1985
Chemical Properties
HCC:V6
Spec Gravity:0.93
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT TAN SYNTHETIC
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENT
Stability Condition to Avoid:OPEN FLAME,HEAT
Hazardous Decomposition Products:CO & UNIDENTIFIED ORGANIC COMPOUNDS
MAY BE FORMED ON COMBUST
Disposal
Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.