Product ID:EA-934 PART B
MSDS Date:01/01/1987
FSC:8040
NIIN:00-788-5498
Kit Part:Y
MSDS Number: BFPWF

DEXTER CORPORATION,HYSOL DIVISION

2850 WILLOW PASS ROAD
PITTSBURG, CA 94565-3237
US

Emergency Phone: 415-687-4201

Info Phone: 415-687-4201

Cage: 79436

DEXTER CORPORATION ADHESIVE & COATING SYSTEMS

312 BAY POINT, CA 94565-3299 US

Telephone: 202-483-7616

Cage: 33564

DIETHYLENE TRIAMINE

CAS: 111-40-0

RTECS: IE1225000

Fraction By Weight: 13%.

OSHA PEL 1 PPM

ACGIH TLV: S, 1 PPM; 9192

NON-HAZARDOUS MATERIALS(TYPE NOT SPECIFIED)

Fraction By Weight: 87%.

Effects of Overexposure:SKIN/EYES:CORROSIVE & CAN CAUSE CHEM. BURNS;
INHAL:IRRITAING & CHEST DISCOMFORT & BRONCHIAL SYMPTMS

First Aid:EYES/SKIN:FLUSH W/PLENTY OF WATER; WASH SKIN THOROUGHLY
W/SOAP & WATER; FOR EYES, FLUSH IMMEDIATELY FOR 15 MINUTES & GET
MEDICAL AID. INGESTION: GIVE WATER OR MILK IF SWALLOWED, DO NOT
INDUCE VOMITING . GET MEDICAL AID.

Flash Point:>200F/>93.3C
Extinguishing Media:DRY CHEMICALS,WATER SPRAY OR FOG, FOAM.
Fire Fighting Procedures:WEAR SELF-CONTND. BRTHNG APPART(SCBA)FIRE
FIGHTNG CONF. SPAC
Unusual Fire/Explosion Hazard:DENSE SMOKE & TOXIC GASES MAY BE
LIBERATED FROM HEAT OF FIRE.

Spill Release Procedures:WEAR PROTECTIVE CLOTING,GLOVES, & SAFETY
GLASSES; SCRAPE UP & TRANSFER TO METAL CONTAINER-WIPE UP REMAINING
RESIDUE W/SOLVENTS,OBSERVING SOLVENT FLAMMABILITY CAUTIONS, OR USES
DETERGENT

Handling and Storage Precautions:KEEP PRODUCE COOL IAW LABEL
INSTRUCTIONS: DONOT HEAT MIXED ADHESIVE ABOVE 125F UNLESS CURING
SURFACES TO BE BONDED; OBSERVE CAUTIONS FOR HEAT BUILD-UP
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE;DO NOT HEAT MIXED
ADHESIVE (>125F);FAILURE TO OBSERVE CAUTIONS MAY RESULT IN
EXCESSIVE HEAT BUILD-UP WITH RELEASE OF TOXIC GASES.

Respiratory Protection:NIOSH APPRVD MASK FOR TOXIC DUSTS WHEN CURED
PRODUCT DRY SANDED,ETC.
Ventilation:LOCAL EXHAUST; RECOMMENDED WHEN SANDING CURED
PRODUCT;MECHAN
Protective Gloves:IMPERVIOUS TYPE
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:AS NEEDED TO PROTECT SKIN & CLOTHING
Supplemental Safety and Health
MSDS DATED: 4/85:KEY1:C2.

HCC:B2
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<1.
Vapor Density:NIL
Spec Gravity:0.96
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:AMBER LIQUID WITH AMMONICAL ODOR.
Percent Volatiles by Volume:<1.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:MFR DOES NOT INDICATE ANY.
Hazardous Decomposition Products:CO, NO*X, ALDEHYDES, ACIDS &
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN & CURING AGENTS
IN BATCHES (>) 1 LB.TOTAL

Waste Disposal Methods:DISPOSE OF AS A HAZARDOUS WASTE IAW TO DOT
HAZARD CLASS; IF ITEM DOES NOT MEET ANOTHER CLASS,DISPOSE OF AS
ORM-E; DISPOSAL METHOD CAN BE LAND BURIAL OR CHEMICAL INCINERATION
AS REGULATED BY ALL GOVERN MENTAL AGENCIES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.