Product ID:URALANE HARDENER 8089 B/X
MSDS Date:01/01/1985
FSC:8040
NIIN:00-828-4936
MSDS Number: BFRNB

Emergency Phone: 213-247-6210

Cage: GO766

Telephone: 818-247-6210/800-873-1138

Cage: GO766

2500

Fraction By Weight: 100%

Effects of Overexposure:NO APPARENT PROBLEMS, PER MFG: USE STANDARD
CHEMICAL HANDLING SAFETY PRACTICES.

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*20 FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Flash Point:>325F,>162C(COO)
Extinguishing Media:WATER OR ANY COMMERCIAL UNIT
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP:H*2O SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:MATL MAY/MAY NOT BURN. CONTAINER MAY
EXPLODE IN HEAT OF FIRE.FIRE MAY YIELD TOXIC GASES.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W/COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:MAINTAIN STRICT HYGIENE,AVOID PHYSICAL CONTACT,REMOVE
& WASH CONTAMINATED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE SKIN
CREAMS.EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
PART B OF 2 PART PRODUCT. THIS PART IS HARDENER. SEE P/N A FOR PART
A(RESIN) ALBINO RABBITS: EYE 17/110;SKIN 0.18.0(PRACTICALLY
NON-IRRITATING.

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.24
Solubility in Water:SLIGHT
Appearance and Odor:DARK AMBER LIQUID; AMINE ODOR
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
ACIDS AND PEROXIDES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:NONE NOTED, BUT EXPECT CO, CO*2, H*20

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPOSAL.
HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE AND LOCAL REGULATIONS. MFG SUGGESTS
BURY IN APPROVED LANDFILL OR REAC Y W RESIN & DISPOSE AS SOLID
WASTE;WASHRESIDUE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.