BFTHL - C 111
- MSDS: BFTHL
- Manufacturer: STABOND CORP
- Product Name: C 111
- National Stock Number: 8040-00-869-8792
Product Identification
Product ID:C 111
MSDS Date:01/01/1987
FSC:8040
NIIN:00-869-8792
MSDS Number: BFTHL
Responsible Party
GARDENA, CA 90249-3008
US
Cage: 25670
Contractor
Telephone: 213-770-0591/800-4249300
Cage: 25670
Ingredients
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 70%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:VAP MAY CAUSE IRRIT TO NOSE,THORAT.ABOVE TLV
IRRIT OF MUCOUS MEMB,UPSET STOMACH,DIZZ,VOMIT,HDCH.SUPP
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR.RESTORE BREATH,IF REQUIRED.KEEP
WARM.GET MED ATTN.EYE:WASH W/ LARGE AMOUNTS OF H*2O.IF IRRIT
PERSISTS,CALL MD.INGEST:IF CONSCIOUS,DRINK 3 GLASS OF WATER OR MILK
& INDUCE VOMI T.CALL MD.SKIN:WASH W/ SOAP,WATER.IF IRRIT,CALL MD
Fire Fighting
Flash Point:20F,-7C COC
Lower Limits:1.8
Extinguishing Media:FOAM,ALCOHOL FOAM,CO*2,DRY CHEMICAL
Fire Fighting Procedures:SCBA IS REQUIRED FOR FIRES IN ENCLOSED AREAS
Unusual Fire/Explosion Hazard:VOLATILE SOLVENT CONSTITUENT CAN READILY
FORM EXPLO OR FLAMM MIXT IN AIR.VAP CAN FLOW TO IGNIT SOURC
Accidental Release
Spill Release Procedures:HANDLE AS A FLAMMABLE LIQUID.REMOVE ALL
IGNITION SOURCES.SOAK UP WET MATERIAL ON A NON-COMBUSTIBLE
ABSORBENT AND PLACE IN A CLOSED METAL CONTAINER.
Handling
Handling and Storage Precautions:STORE IN COOL,WELL VENTILATED AREAS
AWAY FROM ANY IGNIT SOURCES AND STRONG OXIDIZING AGENTS.KEEP CONTNR
CLOSED,WHEN NOT IN USE.DO NOT USE CONTACT LENS
Other Precautions:DO NOT TRANSFER TO PLASTIC CONTNR.GROUND,BOND METAL
CONTNR WHEN DISPENSING.NO SMOKING IN AREAS OF USE OR STORAGE.USE
ONLY NON-SPARKING TOOLS NEAR WET ADHES OR SOLVENT VAP.WASH CONTAMIN
CLOTH.
Exposure Controls
Ventilation:MECHANICAL VENTILATION,LOCAL EXHAUST TO KEEP BELOW TLV.
Protective Gloves:POLYETHYLENE
Eye Protection:SAFE GLASS W/ SIDE SHIELD
Other Protective Equipment:EYE WASH FOUNTAIN OR BOTTLES.SOLVENT INSO
BARRIER HAND CREAM
Supplemental Safety and Health
MSDS PREP:04AUG86.EFFECT OF OVEREXPO:HIGH CONCENTRN CAN CAUSE
UNCON.LIQUID CONTACT WILL DEFAT SKIN & MAY CAUSE DERMATITIS.EYE
CONTACT MAY CAUSE IRRIT AND BURNING SENSATION.SPEC:TYPE III
Chemical Properties
Boiling Pt:B.P. Text:176F,80C
Vapor Density:>1
Spec Gravity:0.9
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:TAN COLOR,31-35% SOLID
Percent Volatiles by Volume:77.8
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZATION AGENTS CAN CAUSE SPONTANEOUS COMBUSTION
Stability Condition to Avoid:KEEP AWAY FROM ALL SOURCES OF IGNITION AND
HEAT.
Hazardous Decomposition Products:BURNING MAY PRODUCE NITROUS
OXIDE,PHENOLS,CO*2,HCN,CO
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/ LOCAL,STATE AND FEDERAL
REGULATIONS FOR METHYL ETHYL KETONE.SOLID INGREDIENTS NOT
CONSIDERED HAZARDOUS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.