Product ID:MD 3113
MSDS Date:01/01/1987
FSC:8010
NIIN:00-879-1103
MSDS Number: BFTNT

DEVOE & RAYNOLDS CO.

Emergency Phone: 502-897-9861

Cage: EO559

DEVOE COATINGS CO DIV OF GROW GROUP INC

RIVERSIDE, CA 92507-2606 US

Cage: 70506

CUPROUS OXIDE

CAS: 1317-39-1

RTECS: GL8050000

Fraction By Weight: 70.0%

ACGIH TLV: 1MG/M3

TRIORTHOCRESYL PHOSPHATE

CAS: 78-30-8

RTECS: TD0350000

Fraction By Weight: 05.0%

OSHA PEL S, 0.1 MG/M3

ACGIH TLV: S, 0.1 MG/M3; 9192

METHYL ISOBUTYL KETONE (SARA III)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 10.0%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 05.0%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Effects of Overexposure:EYE, LUNG, SKIN IRRITANT.

First Aid:VAPORS;REMOVE TO FRESH AIR, CAL PHYSICIAN EYES FLUSH WITH
WATER 15 MIN, CAL DOCTOR. SKIN: WASH WITH SOAP & WATER.

Flash Point:80F/27C TOC
Lower Limits:1.30
Upper Limits:1.00
Extinguishing Media:CO2, DRY CHEMICALS
Unusual Fire/Explosion Hazard:WATER SHOULD BE USED TO COOL CONTAINERS
EXPOSED TO FIRE

Spill Release Procedures:AVOID BREATHING VAPORS, CONTACT WITH LIQUID.
EXTINGUISH IGNITION SOURCES.

Handling and Storage Precautions:STORE IN COOL PLACE
Other Precautions:CLOSE CONTAINERS AFTER USE

Respiratory Protection:BOM-APPROVED RESPIRATOR IN CONFINED AREAS.
Ventilation:SPARK-PROOF FANS
Protective Gloves:SOLVENT RESIST
Eye Protection:SOLVENT RESIST
Other Protective Equipment:NORMAL PROTECTIVE CLOTHING
Supplemental Safety and Health

HCC:F3
Boiling Pt:B.P. Text:240F/116C
Vapor Pres:013
Vapor Density:>1
Spec Gravity:2.3800
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:MODERATE
Appearance and Odor:LIQUID PAINT WITH A KETONE SMELL
Percent Volatiles by Volume:37.5

Stability Indicator/Materials to Avoid:YES
OXIDIZERS
Hazardous Decomposition Products:CO, CO2, COPPER COMPOUNDS

Waste Disposal Methods:DISPOSE IN CLOSED METAL CONTAINERS AWAY FROM
IGNITION SOURCES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.