Product ID:HARDENER 951
MSDS Date:01/01/1985
FSC:8030
NIIN:00-903-6549
MSDS Number: BFVTC

Telephone: 818-247-6210/800-873-1138

Cage: GO767

POLYAMINE;POLYALIPHATIC AMINE

Fraction By Weight: 100%

Effects of Overexposure:SKIN/EYES BURNS;PROLONGED CONTACT MAY CAUSE
DERMATITIS(STRONG SENSITIZER).

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH,
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Flash Point:>295F,>146C(COC)
Extinguishing Media:WATER,CO*2, OR DRY CHEMICAL
Fire Fighting Procedures:USE WATER SPRAY TO COOL CONT, KNOCK-DOWN
VAPORS. WEAR SCBA.
Unusual Fire/Explosion Hazard:MATL MAY/MAY NOT BURN. CONTAINER MAY
EXPLODE IN HEAT OF FIRE.FIRE MAY YIELD TOXIC GASES.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. PROVIDE VENTILATION. STOP LEAK. H*2O SPRAY COOL
CONT/DIVERT SPILL FROM FIRE/HEAT. ABSORB W COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS;LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED,LOW
FIRE RISK AREA. KEEP CONTAINERS TIGHTLY CLOSED. PROTECT FORM
PHYSICAL DAMAGE.
Other Precautions:MAINTAIN STRICT HYGIENE, AVOID PHYSICAL CONTACT,
REMOVE & WASH CONTAMINATED CLOTHING. MFR SUGGESTS USE OF PROTECTIVE
SKIN CREAMS. EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.

Respiratory Protection:FOR EXPOSURE:SELF-CNTND BRTH APP/APPR RESPIRATOR
Ventilation:MECHANICAL(GENGERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING.
Supplemental Safety and Health
VAPOR PRESSURE IS LESS THAN 0.01;

HCC:N1
Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:LOW
Vapor Density:5.0
Spec Gravity:0.98
Solubility in Water:COMPLETE
Appearance and Odor:PALE YELLOW LIQUID; STRONG AMINE ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
ACIDS & PEROXIDES.
Stability Condition to Avoid:IGNITION SOURCES
Hazardous Decomposition Products:NOXIOUS AMINE FRAGMENTS
Conditions to Avoid Polymerization:ACID CONTAMINATION.

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPOSAL.
HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERALSTATE AND LOCAL REGULATIONS. MFG SUGGESTS
INCINERATION OR FLUSH IN APPROVED SEWER USING EXCESSIVE AMOUNTS OF
WATER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.