Product ID:TT-E-508C
MSDS Date:01/01/1987
FSC:8010
NIIN:00-932-3354
MSDS Number: BFXGS

DURON, INC.

10406 TUCKER ST
BELTSVILLE, MD 20705-2201
US

Cage: LO183

DURON, INC.

BELTSVILLE, MD 20705-4600 US

Telephone: 301-937-4600

Cage: LO183

TITANTIUMDIOXIDE

RTECS: XR2100000

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192

SILICATES

ALKYD RESIN (SOLIDS)

Fraction By Weight: 23.1%

MINERAL SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 27%

ACGIH TLV: 100PPM

Effects of Overexposure:IRRIT OF RESPIRATORY.TRACT & EYES.INHALATION OF
HIGH VAP CONCENTR MAY HAVE RESULTS RANGING FR DIZZIN

First Aid:EYES:FUSH W/WATER FOR 15 MIN-GET MEDICAL ATTENTION.IF
OVERCOME BY VAPOR,REMOVE FROM EXPOSED AREA IF BREATHING IS
IRREGULAR OR STOPPED,START RESUSCITATION.

Flash Point:104 F TCC 40 C
Lower Limits:0.9%
Extinguishing Media:USE CARBON DIOXIDE,DRY CHEMICAL OR FOAM
Fire Fighting Procedures:FIGHT LIKE A GASOLINE FLASH FIRE
Unusual Fire/Explosion Hazard:EXPOSURE TO EXTREME HEAT MAY CAUSE
BURSTING OF CLOSED CONTAINERS.

Spill Release Procedures:REMOVE ALL IGNITION SOURCES,KEEP PEOPLE
AWAY.RECOVER LIQUID ADD ABSORBENT TO SPILL AREA.AVOID BREATHING
VAPORS.VENTILATE ENCL SPACES.KEEP PETROLEUM PRODUCTS OUT OF AL
PUBLIC SEWER & STREAMS.

Handling and Storage Precautions:KEEP AWAY FR HEAT,SPARKS, & OPEN
FLAME.
Other Precautions:AVOID PROLONGED CONTACT W/SKIN.DO NOT TAKE
INTERNALLY.

Respiratory Protection:HYDROCARBON OR ORGANIC VAP CANISTERS.SELF
CONTAINED APPARATUS ABOVE
Ventilation:LOC EXHAUST-FACE VELOCITY 60 FPM.
Protective Gloves:HYDROCARBON INS
Eye Protection:SAFETY GOGG OR GLASSES
Other Protective Equipment:MUST COMPLY W/SECTION1910.132-135 OSHA STNDS
Supplemental Safety and Health
ADD'TL HAZ.INGRED:DRIERS;ASA NOTE:PIGMENTS WHICH CONSIST OF
TITANTIUMDIOXIDE,CALCIUM CARBONATE AND SILICATES COMBINED
PERCENTATE OF WGT 48%

Vapor Density:HEAV
Spec Gravity:1.37
Appearance and Odor:LIQUID PAINT-MILD ODOR
Percent Volatiles by Volume:48.7

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:STRONG OXIDANTS LIKE LIQUID CHLORINE&
CONCENTRATED,OXYG HI
Hazardous Decomposition Products:CARBON MONOXIDE IN THE CASE OF
INCOMPLETE COMBUSTION.

Waste Disposal Methods:PLACE IN CLOSED DOT APPRVD CONTAINER.RAGS &
ABSORBENTMATERIAL SHOULD BE IMMEDIATELY IMMERSED IN WATER.USE
APPRVD LANDFILL IN ACCORDANCE W/LOCAL STATE & FEDERAL REGULATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.