Product ID:R8-2038
MSDS Date:01/01/1985
FSC:8040
NIIN:00-935-4012
Kit Part:Y
MSDS Number: BFXNG

HYSOL DIV. THE DEXTER CORP.

Emergency Phone: 716-372-6300

Cage: KO252

HYSOL DIV. THE DEXTER CORP.

OLEAN, NY 14760-1297 US

Telephone: 716-372-6300/6309

Cage: KO252

N-BUTYL GLYCIDYL ETHER (BGE)

CAS: 2426-08-6

RTECS: TX4200000

Fraction By Weight: 12%.

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM; 9293

EPOXY RESIN

Effects of Overexposure:MFR STATES NO ACUTE SYMPTOMS EXPECTED.A
SENSITIZER.PROLONGED/REPEATED CONTACT MAY CAUSE SKIN RSH

First Aid:EYE:IMMED FLUSH W/WATER AT LEAST 15 MIN.CALL MD.SKIN:FLUSH
W/PLENTY OF WATER.WASH THOUOUGHLY W/SOAP & WATER.REMOVE
CONTAMINATED CLOTHING.WASH BEFORE REUSE

Flash Point:200F TOC
Lower Limits:0.4
Upper Limits:1.3
Extinguishing Media:SMALL FIRE:CO*2,DRY CHEM. LARGE FIRE:ORDINARY FOAM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:COVER W/ABSORBENT MATERIAL,THEN SCRAPE UP AND
TRANSFER TO METAL CONTAINER.OBSERVE FLAMMABLE CHARACTERISTICS OF
SOLVENTS,IF USED TO WIPE UP STICKY RESIDUE.ALSO TAKE PRECAUTIONS
AGAINST INHALATION HAZAR D

Handling and Storage Precautions:WARNING:MAY CAUSE SKIN SENSITIZATION &
OTHER ALLERGIC RESPONSES.USE ONLY W/ADEQUATE
VENTILATION,PARTICULARLY IF HEATED OR SPRAYED
Other Precautions:AVOID CONTACT W/SKIN OR EYES.PROVIDE SAFETY SHOWER &
EYE WASH

Respiratory Protection:NIOSH/MSHA APPRVD RESP PROTECTION FOR PARTICLR
EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST -PREFERRED.MECHANICAL-ACCEPTABLE
Protective Gloves:PLASTIC OR RBBR
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:COVERALLS OR APRON -PROTECT FROM SKIN &
CLOTHING CONTAMINATI
Supplemental Safety and Health
BP GIVE @ 95 MMHG. VAPOR DENSITY GIVEN @ 25C. PART A OF A TWO PART
PRODUCT PART B IS HD-3490, SEE SAME NSN, P/N INDICATOR B. MIX RATIO
(BY WT.) PART A/PART B IS 100/20.

HCC:N1
Boiling Pt:B.P. Text:284F
Vapor Pres:2.
Vapor Density:3.8
Spec Gravity:1.14
Evaporation Rate & Reference:>1 BUTYL ACETATE
Solubility in Water:<1%
Appearance and Odor:AMBER LIQ,SWEET,PLEASANT ODOR,LOW VISCOSITY
Percent Volatiles by Volume:15.

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS,AMINES,MERCAPTANS AND BASES
Hazardous Decomposition Products:CO,ALDEHYDES & OTHER ORGANICS
Conditions to Avoid Polymerization:EXOTHERMS WHEN CURED

Waste Disposal Methods:CONTROLLED BURNING OR BURY IN SANITARY LANDFILL
IN ACCORDANCE W/LOCAL ,STATE AND FEDERAL REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.