BGCHV - EA 934 PART A

  • MSDS: BGCHV
  • Manufacturer: DEXTER CORP HYSOL DIV
  • Product Name: EA 934 PART A
  • National Stock Number: 8040-00-995-7017
Product Identification

Product ID:EA 934 PART A
MSDS Date:01/01/1985
FSC:8040
NIIN:00-995-7017
Kit Part:Y
MSDS Number: BGCHV

Responsible Party
DEXTER CORP. HYSOL DIVISION

Emergency Phone: 415-687-4201

Cage: 1JB33

Contractor
DEXTER CORP THE HYSOL DIV
SEABROOK, NH 03874 US

Telephone: 603-474-5545

Cage: 1JB33

Ingredients

EPOXY RESINS

Fraction By Weight: 58.0%


ASBESTOS (AMIANTHUS, OBSOLETE AMOSITE), (FOR OSHA PEL, SEE

CAS: 1332-21-4

RTECS: CI6475000

Fraction By Weight: 14.0%

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 0.5 FIBERS/CC; A1;89

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


FILLERS,UNSPECIFIED

Fraction By Weight: 28.0%

Hazards

Effects of Overexposure:MAY CAUSE EYE IRRITATION SKIN SENSITIZATION OR
OTHER ALLERGIC RESPONSES.

First Aid

First Aid:WASH SKIN IMMEDIATELY WITH SOAP AND WATER. FLUSH EYES
IMMEDIATELY WITH PLENTY OF WATER.

Fire Fighting

Flash Point:> 200 F, 93C TCC
Extinguishing Media:CHEMICAL FOAM,DRY CHEMICALS, CO*2
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE LIBERATED

Accidental Release

Spill Release Procedures:REMOVE EXCESS. CLEAN WITH SOLVENTS.

Handling

Handling and Storage Precautions:A MASK FOR ASBESTOS IS NOT NECESSARY
UNLESS THE CURED ADHESIVE IS DRY SANDED, ABRADED, ETC.
Other Precautions:FOLLOW THE RECOMMENDED STORAGE CONDITIONS: 3 MONTHS @
77 F, 1 YR. @ 40 F, 2 YRS @ 0 F. ANSI CLASSIFICATION 4

Exposure Controls

Respiratory Protection:APPROVED NIOSH RESPIRATOR AND MASK FOR ASVESTOS.
(SEE PRECAUTIONS)
Ventilation:LOCAL EXHAUST OR MECHANICAL VENTILATION REQUIRED.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/GOGGLES
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.55
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS GREY PASTE WITH SLIGHT ODOR

Stability

Stability Indicator/Materials to Avoid:NO
Stability Condition to Avoid:SEE STORAGE RECOMMENDATIONS
Hazardous Decomposition Products:COMPOUNDS OF CARBON AND NITROGEN
Conditions to Avoid Polymerization:AVOID HEATING LARGE MASSES TOO HIGH
IN TEMP.

Disposal

Waste Disposal Methods:LAND BURIAL

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.