Product ID:HARDENER 951
MSDS Date:01/01/1985
FSC:8040
NIIN:01-021-7401
MSDS Number: BGFCJ

Emergency Phone: 213-247-6210

Cage: GO766

Telephone: 818-247-6210/800-873-1138

Cage: GO766

POLYAMINE;POLYALIPHATIC AMINE

Fraction By Weight: 100%

Effects of Overexposure:SKIN/EYES BURNS;PROLONGED CONTACT MAY CAUSE
DERMATITIS(STRONG SENSITIZER).

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*20 FOR 15 MIN;INGEST:RINSE
MOUTH;GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR
OTHER SYMPTONS OF OVER EXPOSURE.

Flash Point:>295F,>146C(COC)
Extinguishing Media:WATER,CO*2, OR DRY CHEMICAL
Fire Fighting Procedures:USE WATER SPRAY TO COOL CONT, KNOCK-DOWN
VAPORS. WEAR SCBA.
Unusual Fire/Explosion Hazard:MATL MAY/MAY NOT BURN. CONTAINER MAY
EXPLODE IN HEAT OF FIRE.FIRE MAY YIELD TOXIC GASES.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W/COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:MAINTAIN STRICT HYGIENE,AVOID PHYSICAL CONTACT,REMOVE
& WASH CONTAMINSTED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE SKIN
CREAMS. EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.

Respiratory Protection:IF EXPOSD TLV,NIOSH/MESA APPR SELF-CNTND BRTHG
APP (POS PR MODE)
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
VAPOR PRESSURE IS LESS THAN 0.01;

HCC:N1
Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:LOW
Vapor Density:5.0
Spec Gravity:0.98
Solubility in Water:COMPPLETE
Appearance and Odor:PALE YELLOW LIQUID; STRONG AMINE ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
ACIDS & PEROXIDES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:NOXIOUS AMINE FRAGMENTS
Conditions to Avoid Polymerization:ACID CONTAMINATIONS

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPOSA.
HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL, FEDERAL,STATE AN LOCAL REGULATIONS. MFG SUGGETS
INCINERATION OR FLUSH IN APPROVED S EWER USING EXCESSIVE AMOUNTS
WATER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.