BGGRM - K & N TYPES OF STENCIL INK

Export as PDF
  • MSDS: BGGRM
  • Manufacturer: MARSH STENCIL MACHINE CO
  • Product Name: K & N TYPES OF STENCIL INK
  • National Stock Number: 7510-01-036-3722
Product Identification

Product ID:K & N TYPES OF STENCIL INK
MSDS Date:01/01/1985
FSC:7510
NIIN:01-036-3722
MSDS Number: BGGRM

Responsible Party
MARSH STENCIL MACHINE CO.

Emergency Phone: 618 234-1122

Cage: 38512

Contractor
MARSH STENCIL MACHINE CO
388 BELLEVILLE, IL 62222 US

Telephone: 618-234-1122

Cage: 38512

Ingredients

PIGMENTS


VEHICLE


SOLVENTS


ADDITIVE

Hazards

Effects of Overexposure:IRRIT. TO SKIN AND EYES

First Aid

First Aid:WASH SKIN WELL FLUSH EYES WITH WATER FOR 15 MIN. INGESTED:DO
NOT INDUCE VOMIT. CALL DR. IMMED.

Fire Fighting

Flash Point:105F,40.6 CC
Lower Limits:0.9
Upper Limits:6.0
Extinguishing Media:CARBON DIOXIDE
Unusual Fire/Explosion Hazard:AVOID FIRE,HEAT,SPARKS, IGNITION
SOURCES,STORAGE IN DIRECT SUNLIGHT.COMBUSTIBLE.

Accidental Release

Spill Release Procedures:ABSORB IN SWADUST OR CLOTH.CLEAN WITH NAPHTHA.
WASH WITH SOAP AND WATER.

Handling

Handling and Storage Precautions:DRY INSIDE STORAGE.MAXIMUM TEMP.120F.
AVOID PROLONGED CONTACT WITH SKIN OR BREATHING OF VAPOR
Other Precautions:FOR ACCIDENTIAL EYE CONTACT.FLUSH WITH WATER AND
CONTACT DR.

Exposure Controls

Respiratory Protection:YES,IF INK IS SPRAYED
Ventilation:DESIRABLE IF WORK AREA IS SMALL AND CONFINING
Protective Gloves:NONE
Eye Protection:YES
Other Protective Equipment:NONE
Supplemental Safety and Health
PIGMENTS:& EXTENDER PIGMENTS ALUMINUM SILICATE-BD14500;SILICON
DIOXIDE-VV73200;BARIUM SULPHATE(EXCEPT BLACK)THINNERS(ALL
COLORS)MINERIAL SPIRITS NAPHTHA.AROMATIC HYDROCRB.NAPHTHA

Chemical Properties

Boiling Pt:B.P. Text:300F, 148C
Vapor Pres:<1
Vapor Density:3.9
Spec Gravity:86/1.3
Solubility in Water:NEGLIGIBLE
Appearance and Odor:NAPHTHA ODOR WHITE LIQUID
Percent Volatiles by Volume:75

Stability

Stability Indicator/Materials to Avoid:YES
LACQUER THINNER AND ALCHOL
Stability Condition to Avoid:STORAGE ABOVE 120F
Hazardous Decomposition Products:WHEN EXPOSED TO FLAME,SOLVENT CAN
REACT W/OXIDIZING MATERIAL
Conditions to Avoid Polymerization:STORE ABOVE 120F

Disposal

Waste Disposal Methods:LOCAL,STATE AND FED. REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.