BGGWM - A-1177-B-2
- MSDS: BGGWM
- Manufacturer: BF GOODRICH ADHESIVE SYSTEMS
- Product Name: A-1177-B-2
- National Stock Number: 8040-01-038-1028
Product Identification
Product ID:A-1177-B-2
MSDS Date:01/29/1987
FSC:8040
NIIN:01-038-1028
Kit Part:Y
MSDS Number: BGGWM
Responsible Party
AKRON, OH 44318
Emergency Phone: (216) 379-3298
Cage: 56277
Contractor
Telephone: 216-374-3000
Cage: 56277
Ingredients
POLYAMIDE
CAS: 68082-29-1
Fraction By Weight: <55%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:PROLONGED/REPEATED MAY CAUSE
MODERATE IRRITATION, MAY CAUSE ALLERGIC RESPONSE IN SOME
INDIVIDUALS. EYE:MODERATE TO SEVERE IRRITATION.
Explanation of Carcinogenicity:NOT APPLICABLE
Effects of Overexposure:SEE HEALTH HAZARD DATA .
Medical Cond Aggravated by Exposure:SKIN RASHES
First Aid
First Aid:EYE:IMME FLUSH W/LGE AMTS OF WTR FOR AT LEAST 15MIN.
SKIN:REMOVE CONTAMINATED CLOTHING, WASH AREA W/PLENTY OF SOAP &
WTR, SEE PHYS IF IRRI DEVELOPS. INHALATION:REMOVE FROM EXPOSURE.
SUPPORT BREA THING (GIVE O*2/ARTIFICIAL RESPIRATION).
INGESTION:CALL MD IMME .
Fire Fighting
Flash Point Method:TCC
Flash Point:340F/171.1C
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:DO NOT ENTER CONFINED SPACE W/OUT NIOSH/MSHA
APPROVED SCBA & FULL PROTECTIVE EQIPMENT .
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:AVOID SKIN & EYE CONTACT, SCRAPE UP & PLACE IN
CONTAINER
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:AVOID PROLONGED SKN & EYE CONTACT;FOR
INDUSTRIAL USE ONLY.KEEP OUT OF REACH OF CHILDREN. STORE IN A COOL
DRY PLACE,AWAY FROM SOURCES OF HEAT.
Other Precautions:IN ADDITION TO ANY LISTED PRECAUTION,SHOULD CONSULT
OCCUPATIONAL SAFETY & HEALTH SPECIALIST TO INSURE THAT SUGGESTED
HANDLING PROCEDURE WILL BE ADEQUATE & IN CONPLIANCE W/APPLICABLE
LAWS & REGULATIONS .
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST MAY BE NEEDED IF MATERIAL IS HEATED.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:NOT NORMALLY NEEDED
Work Hygienic Practices:N/K
Supplemental Safety and Health
PH:N.RTE ENTRY:N KEY1:N1.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:0F/-17.78C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:HV THN AIR
Spec Gravity:1.422
pH:N/K-FP
Evaporation Rate & Reference:N-BUTYL ACETATE
Solubility in Water:N/K
Appearance and Odor:TAN PASTE AMINE ODOR
Percent Volatiles by Volume:0.0
Corrosion Rate:
Stability
Stability Indicator/Materials to Avoid:YES
EPOXY RESINS
Stability Condition to Avoid:AVOID MIXNG W/LGE AMTS OF EPOXY. NO MORE
THAN TWO POUNDS.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
AMMONIA, OTHERS POSSIBLE
Conditions to Avoid Polymerization:AVOID MIXING W/LGE AMTS OF EPOXY. NO
MORE THAN TWO POUNDS.
Disposal
Waste Disposal Methods:THIS MATERIAL IF DISCARDED IS NOT DIFINED AS
HAZARDOUS BY 40CFR 261 DISPOSAL METHODS, INCINERATE/LANDFILL IAW
APPLICABLE FEDERAL,STATE & LOCAL LAW/REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.