BGHRX - EA6 EPOXY

  • MSDS: BGHRX
  • Manufacturer: DEXTER CORP HYSOL DIV
  • Product Name: EA6 EPOXY
  • National Stock Number: 8040-01-048-2193
Product Identification

Product ID:EA6 EPOXY
MSDS Date:01/01/1985
FSC:8040
NIIN:01-048-2193
Kit Part:Y
MSDS Number: BGHRX

Responsible Party
DEXTER CORP,HYSOL DIV.

Emergency Phone: 415-687-4201

Cage: 1JB33

Contractor
DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
312 BAY POINT, CA 94565-3299 US

Telephone: 202-483-7616

Cage: 33564

Ingredients

MODIFIED RESINS,EPOXY


ASBESTOS (AMIANTHUS, OBSOLETE AMOSITE), (FOR OSHA PEL, SEE

CAS: 1332-21-4

RTECS: CI6475000

Fraction By Weight: 23%.

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 0.5 FIBERS/CC; A1;89

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Effects of Overexposure:MAY CAUSE EYE IRRITATION, SKIN SENSITIZATION OR
OTHER ALLERGIC RESPONSES.

First Aid

First Aid:SKIN CONTACT:WASH IMMEDIATELY WITH SOAP AND WATER. EYE
CONTACT:FLUSH IMMEDIATELY WITH PLENTY OF WATER.

Fire Fighting

Flash Point:>200F TCC
Extinguishing Media:CO*2, FOAM, DRY CHEMICALS

Accidental Release

Spill Release Procedures:REMOVE EXCESS & WIPE CLEAN WITH SOLVENTS AS
NECESSARY.

Handling

Handling and Storage Precautions:STORE AT 90F.
Other Precautions:READ CONTAINER LABELS. IF IT IS NEC.TO SAND THE CURED
ADHSV"WET SANDING"ISREC.TO ELIM.AIRBORNE ASBESTOS.FOR"DRY
SANDING"FOLLOW REC. IN"RESPIRATORY PROTECTION."

Exposure Controls

Respiratory Protection:APPRVD NIOSH RESPIRATOR AND FILTER FOR
ASBESTOS.SEE"OTHER PRECAUTNS"
Ventilation:LOCAL AND GENERAL RECOMMENDED.
Protective Gloves:RUBBER
Eye Protection:SFTY GOGGLES OR GLASSES.
Supplemental Safety and Health
KEY1:N1.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.28
Solubility in Water:NEGLIGIBLE
Appearance and Odor:RED VISCOUS PASTE WITH PUNGENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:LANDFILL OR CONTROLLED BURNING AS REGULATED BY
ALL GOVERNMENTAL AGENCIES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.