BGJJL - K-1360/K68

  • MSDS: BGJJL
  • Manufacturer: KENNAMETAL INC
  • Product Name: K-1360/K68
  • National Stock Number: 3455-01-054-6722
Product Identification

Product ID:K-1360/K68
MSDS Date:01/01/1987
FSC:3455
NIIN:01-054-6722
MSDS Number: BGJJL

Responsible Party
KENNAMETAL INC
981 SOUTH
LATROBE, PA 15650
US

Emergency Phone: 800-424-9300

Cage: EO189

Contractor
KENNAMETAL, INC.
231 LATROBE, PA 15650-0231 US

Telephone: 412-539-5000

Cage: 85597

Ingredients

TUNGSTEN CARBIDE (CAS # 12070-12-1) (PEL-5 MG/CUM,MFR)

ACGIH TLV: 5 MG/CUM,AS W


COBALT (SARA III)

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: 2-25%

OSHA PEL 0.1 MG/M3;AS CO

ACGIH TLV: 0.05 MG/M3;DUST 9293


TANTALUM CARBIDE (CAS # 12070-06-3) (PEL-5 MG/CUM,MFR)

ACGIH TLV: 5 MG/CUM (MFR)


TITANIUM CARBIDE (CAS # 12070-08-5) (PEL-5 MG/CUM,MFR)


NIOBIUM CARBIDE (CAS # 12069-94-2) (PEL-5 MG/CUM,MFR)

ACGIH TLV: 5 MG/CUM (MFR)

Hazards

Health Hazards Acute and Chronic:MAY CAUSE TEMPORARY OR PERMANENT
RESPIRATORY DISEASE. PERMANENT RESPIRATORY DISEASE CAN LEAD TO
DISABILITY OR DEATH. NONE OF THE COMPONENTS OF THIS MATERIAL HAS
BEEN IDENTIFIED AS KNOWN OR SUSPECTED C ARCINOGENS.
Effects of Overexposure:OVEREXPOSURE TO THIS MATERIAL IN THE FORM OF
METALLURGICAL POWDER,DUST OR MIST FROM GRINDING OR SWEEPING IS
HAZARDOUS TO HEALTH. MAY CAUSE EYE,SKIN,& MUCOUS MEMBRANE
IRRITATION.
Medical Cond Aggravated by Exposure:CERTAIN PULMONARY & SKIN CONDITIONS
MAY BE AGGRAVATED BY EXPOSURE.

First Aid

First Aid:IN ALL CASES GET MED ATTN IMMED.INHAL:REMOVE FROM EXP TO
FRESH AIR IMMED.STOP BRTHING-GIVE ARTIFCL RESP.KEEP WARM,AT
REST.SKIN:REMOVE CONTAM CLOTHES,SHOES IMMED.WASH EXP AREA
W/SOAP/MILD DETERGENT,LRG AMTS H*2O 15-20 MIN.EYE:WASH IMMED W/LRG
AMTS OF H*2O 15-20 MIN.INGEST:IF CONSCIOUS,IMMED GIVE LRG AMTS OF
H*2O,INDUCE VOMITNG

Fire Fighting

Extinguishing Media:LOCALIZED POWDER FIRE-DRY SAND,DRY DOLOMITE,NACL OR
SODA ASH
Fire Fighting Procedures:MOVE CNTNR IF POSS.COOL FIRE EXP CNTNR
W/H*2O.LRG FIRE-USE UNMANNED HOSE HOLDR/MONITR NOZZ;ELSE
W/DRAW,LET(SEE SUPP DATA)
Unusual Fire/Explosion Hazard:FINELY DIVIDED TUNGSTEN CARBIDE
POWDR/GRINDING DUST EXPECT TO BE FIRE/EXPLO HAZ WHEN EXP TO HIGH
TEMP OR (SEE SUPP DATA)

Accidental Release

Spill Release Procedures:SWEEP UP W/MINIMUM DUST GENERATION & PLACE
INTO SUITABLE CLEAN,DRY CNTNRS FOR LATER DISPOSAL OR RECLAMATION.
RESIDUE SHOULD BE CLEANED UP USING A HIGH-EFFICIENCY PARTICULATE
FILTER VACUUM OR WET CLEAN UP. USE APPROPRIATE RESPIRATORY
PROTECTION.

Handling

Handling and Storage Precautions:AVOID DISPERSN OF DUST IN AIR.FINELY
DIVIDED PARTICLES,DUST,FUMES POSS FLAMMABLE/EXPLOSIVE.KEEP FROM
SPARK/IGNITN SOURCE.STORE IN CLEAN,DRY,COOL AREA.
Other Precautions:WASH HANDS AFT HANDLE,BEFORE EAT/SMOKE.DONT SHAKE
CLOTHES,RAGS,OTHR ITEMS TO REMOVE DUST.REMOVE DUST BY
WASHING/VACUUMING.PERIODC MEDICAL EXAMS RECM FOR PERSONS REGULARLY
EXPOSED DUST/MIST

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN
Ventilation:LOCAL EXHAUST/GENERAL DILUTION TO KEEP EXPOS LEVELS
Protective Gloves:PREV CONTACT W/PROPER GLOVES/BARRIER CRM
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS OR GOGGLES
Other Protective Equipment:WEAR PROPER PROT CLOTHES/EQUIP TO PREV
RPTD/PRLNG SKIN CONTACT.WASH SOILED CLOTHES SEPARATE.EYE-WASG IN
IMMED WORK AREA.
Supplemental Safety and Health
SPECL FIRE FIGHT:FIRE BURN.AVOID BRTH FUME.USE SCBA W/FULL FACEPIECE
OPERATD IN PRESS-DEMAND/OTHR POSITV PRESS MODE. FIRE/EXPLO
HAZ:IGNITN SOURCES.PARTICL SIZE,AIR DISPERSN DETERMINE REACTIVTY.
MATLS TO AVOID:LEAD OXIDE.COBALT W/AMMONIUM NITRATE&METALS/BROMINE
PENTAFLUORIDE,HYDRAZINIUM NITRATE,NITRYL FLUORIDE,ACETYLENE

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:2870C,5198F
Spec Gravity:10-16
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY POWDER OF SOLID

Stability

Stability Indicator/Materials to Avoid:YES
TUNGSTEN CARBIDE W/CHLORINE TRIFLUORIDE,FLUORINE,NITROGEN
DIOXIDE,NITROUS OXIDE,IODINE PENTAFLUORIDE, (SEE SUPP DATA)
Stability Condition to Avoid:STABLE UNDER NORMAL TEMPERATURES &
PRESSURE
Hazardous Decomposition Products:THERMAL DECOMPOSITN MAY RELEASE ACRID
SMOKE,IRRITATING FUMES

Disposal

Waste Disposal Methods:THIS IS A VALUABLE MATERIAL THAT SHOULD BE SENT
TO AN APPROPRIATE RECLAMATION FACILITY IF AVAILABLE. IF MATERIAL
CANNOT BE SENT TO RECLAMATION FACILITY,DISPOSAL SHOULD BE MADE IN
COMPLIANCE W/FEDERAL, STATE & LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.