Product ID:URALANE 5738A
MSDS Date:01/01/1987
FSC:8040
NIIN:01-081-3370
MSDS Number: BGKWN

FURANE PRODUCTS; M & T CHEMICALS, INC.

Emergency Phone: (818)247-6210

Cage: GO766

CIBA SPECIALTY CHEMICALS CORP, N. A. / PERFORMANCE

LOS ANGELES, CA 90039-1011 US

Telephone: 818-247-6210/800-873-1138

Cage: GO766

ISOCYANATE PREPOLYMER

Fraction By Weight: >99%=

TOLUENE-2,4-DIISOCYANATE (TDI) (SARA III)

CAS: 584-84-9

RTECS: CZ6300000

Fraction By Weight: <1%

OSHA PEL C,0.02 PPM/0.02 STEL

ACGIH TLV: 0.005PPM/0.02STEL;93

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Effects of Overexposure:EYE IRRITATION GENERALLY PRECLUDES
OVER-EXPOSURE, BUT ASTHAMATICS CAN DEVELOP BRONCHIAL SPASM.

First Aid:INHALE:REMOVE TO FRESH AIR,GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*20 FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES,BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Flash Point:>200F,>93C (COC)
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:WATER COOLS,GENERATES-INSULATING FOAM,ABSORBS
NOXIOUS GASES
Unusual Fire/Explosion Hazard:DECOMP GASES NOXIOUS,WEAR SCBA; H*20
SPRAY COOL CONTAINER TO MINIMIZE RISK OF RUPTURE.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W/COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:MAINTAIN STRICT HYGIENE,AVOID PHYSICAL CONTACT,REMOVE
& WASH CONTAMINATED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE SKIN
CREAMS.EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.

Respiratory Protection:IF EXPOSD TLV,NIOSH/MESA APPR SELF-CNTND BRTHG
APP (POS PR MODE)
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
PART A OF 2 PART PRODUCT. THIS PART IS POLYMER. SEE P/N FOR PART
B(HARDENER). RESIDUES MAY BE NEUTRALIZED WITH AMMONIA & WASHED
USING STRONG DETERGENTS AND WATER. WILL STICK TO SKIN;AVOID.
KEY1:N1

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.2
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS AMBER LIQUID; TYPICAL ISOCYANATE ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
ACIDS & AMINES
Stability Condition to Avoid:AVOID MOISTURE(CAUSES FOAMING);AVOID
MIXING ABOVE 180F.
Hazardous Decomposition Products:NONE NOTED, BUT EXPECT CO, CO*2, H*20.
Conditions to Avoid Polymerization:AVOID HIGH CURING TEMPERATURES.

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPOSAL.
HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE AND LOCAL REGULATIONS. MFG SUGGESTS
INCINERATION OR BURY IN APPROVED LANDFILL(REACT WITH HARDNER OR
WATER TOSOLIDIFY).

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.