Product ID:URALANE 5738A
MSDS Date:01/01/1987
FSC:8040
NIIN:01-081-3370
Kit Part:Y
MSDS Number: BGKWQ

Emergency Phone: (818)247-6210

Cage: OO131

Telephone: (201) 499-2401

Cage: OO131

REACTION PRODUCT OF POLYETHER POLYOL WITH TOLUENE

Fraction By Weight: 100%

ACGIH TLV: 0.02PPM(C)-TDI

Effects of Overexposure:EYE/SKIN:SEVERE IRRITATION,POSSIBLE EYE
DMG,ALLERGIC SKIN RECT;INH:IRR MUC MEMBR-SEE SUPPL DATA.

First Aid:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF NEED. SKIN:WASH WITH
SOAP & WATER. EYES:FLUSH WITH WATER 15 MIN. KEEP WARM AND
QUIET.ING:GIVE 2 GLASSES WATER.SEE DOCTOR.NOTHING BY MOUTH IF
UNCONSCIOUS.

Flash Point:260F,127C,PMCC
Extinguishing Media:CO*2,DRY CHEM
Fire Fighting Procedures:WEAR SCBA,FULL PROTECTIVE GEAR.KEEP WTR OUT OF
CONTAINERS.
Unusual Fire/Explosion Hazard:REACTS WITH WATER TO FORM CO*2.AVOID
BREATHING VAPORS OF FIRE EXPOSED MATERIAL.

Spill Release Procedures:WEAR COMPLETE PROTECT.EQUIPM.VENTIL.AREA.AVOID
BREATHING VAP.USE SCBA FOR LG SPILLS IN CONFINED AREAS.DIKE&ABS.IN
INERT MTL.SWEEP UP&PLACE IN CONT.FOR
DISPOSL.REMOV.CONTAM.CLOTH&WASH W.SOAP&WTR.WASH C LOTH BEFORE
REUSE.KEEP SPILL OUT OF SEWERS/OPEN BO

Handling and Storage Precautions:STORE INDOORS IN A COOL,DRY AREA
W.ADEQUATE VENTIL.USE INERT GAS BLANKETING FOR BULK STORAGE.
Other Precautions:DECONTAMINANT LIQUID:WATER,90%,AMMONIUM HYDROXIDE
8%,DETERGENT 2%.

Respiratory Protection:NIOSH/MSHA APPVD RESP.WHEN TLV IS EXCEEDED.
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN Protective Gloves:IMPERVIOUS
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:FULL PROTECTIVE CLOTHING,SAFETY SHOWER,EYE
WASH STATION
Supplemental Safety and Health
MSDS DATED 11-27-84.CHEM,NAME:POLYETHER BASED POLYURETHANE
PREPOLYMER/OVEREXPSRE.INH:CHEST TIGHT,IRR OF REST
TRACT,COUGH.HEAD,SHORT OF BREATH. KEY1:N1

HCC:V4
Vapor Pres:<.1
Vapor Density:6.0
Spec Gravity:1.2
Viscosity:>3500CPS
Evaporation Rate & Reference:<1 (BU AC=1)
Solubility in Water:REACTS
Appearance and Odor:CLEAR TO PALE STRAW COLOR LIQUID;PUNGENT ODOR
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
STRONG AC,STRONG BASES,ALCOHOLS,CARBOXYLIC AC,REACTIVE METLS
Stability Condition to Avoid:MOISTURE,HEATING OVER 200F
Hazardous Decomposition Products:NITROGEN OXIDES,CO,CO*2
Conditions to Avoid Polymerization:CONTACT WITH MOISTURE,OTHER REACTIVE
METALS.

Waste Disposal Methods:DILUTE W.SUITABLE FLAMM.SOLV;THEN INCIN.IN
APPVD.EQUIPM.DECONTAM.DIKNG MTL W.DECONTAMINANT LIQ;THEN LANDFILL
IAW LOCAL,STATE & FED REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.