BGQCS - C9-4183

Product Identification

Product ID:C9-4183
MSDS Date:01/01/1987
FSC:5970
NIIN:01-188-2931
MSDS Number: BGQCS

Responsible Party
HYSOL DIVISION,THE DEXTER CORP

Emergency Phone: (716)372-6300

Cage: DO953

Contractor
HYSOL DIVISION,THE DEXTER CORP.
OLEAN, NY 14760-1297 US

Telephone: 716-372-6300/6309

Cage: DO953

Ingredients

EPOXY RESIN,LD50 RAT >2000MG/KG (MFR)

Fraction By Weight: 100%.


NO HAZ.COMP.PER MFR.

Hazards

Effects of Overexposure:PROLONGED/REPEATED SKIN CONTACT MAY CAUSE SKIN
IRRITATION.

First Aid

First Aid:EYE:FLUSH W/COPIOUS AMOUNT OF WATER;SIN:WASH WITH SOAP &
WATER;INHALE:REMOVE TO FRESH AIR,GIVE ARTIFICIAL RESPIRATION IF
NEEDED;REMOVE &WASH CONTAM.CLOTHNG BEFORE REUSE.

Fire Fighting

Flash Point:450F,232C,COC
Extinguishing Media:SM FIRE:CO*2,DRY CHEM;LG
FIRE:FOAM(ALC.,POLY,ORDINARY)
Fire Fighting Procedures:NONE-AVOID BREATHING SMOKE.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:COVER W/ABS.MATERIAL,THEN SHOVL INTO WASTE
CONT.IF SPILL AREA IS TO BE SOLV.RINSED TO REMOV.STICKINESS,BE
AWARE OF SOLV,VAPOR HAZARDS.

Handling

Handling and Storage Precautions:STORE IN COOL,DRY WELL VENTED LOW FIRE
RISK AREA. PROTECT FROM HEAT,SHOCK,FRICTION. KEEP CONTAINERS
CLOSED.

Exposure Controls

Respiratory Protection:NONE
Ventilation:LOCAL EXH.ONLY IF HEATED-MECH.(GNRL),NOT ORDINARILY REQD.
Protective Gloves:RUBBER/NEOPRENE
Eye Protection:SFTY GLASSES OR GOGGLES
Other Protective Equipment:COVERALLS OR APRON TO AVOID CLOTH
CONTAM,SKIN CONTACT.
Supplemental Safety and Health
MSDS DATED 06-01-77/

Chemical Properties

HCC:N1
Vapor Pres:N.R
Spec Gravity:1.56
Evaporation Rate & Reference:>1.
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TAN HIGH VISCOSITY LIQUID,VERY SLIGHT ODOR.
Percent Volatiles by Volume:0.

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTAM.W/ALKALITES,ACIDS,AMINES,WATER.
Hazardous Decomposition Products:CO,ALDEHYDES,ACIDS,OTHER
ORG.COMPOUNDS.
Conditions to Avoid Polymerization:EXOTHERM.CURE MAY OCCUR WHEN
LG.QUANT.MIXED W/CURING AGENTS.

Disposal

Waste Disposal Methods:CONTROLLED INCINERATION OR PUT IN METAL CONT.FOR
LANDFILL BURIAL.SOLIDIFY BY MIXING W/ A PORTION OF CURING AGENT
BEFORE LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.