BGTKH - DAMPING FLUID,SILCONE BASE (5CST AND ABOVE)

  • MSDS: BGTKH
  • Manufacturer: BOLT INC
  • Product Name: DAMPING FLUID,SILCONE BASE (5CST AND ABOVE)
  • National Stock Number: 9150-00-435-2712
Product Identification

Product ID:DAMPING FLUID,SILCONE BASE (5CST AND ABOVE)
MSDS Date:12/16/1988
FSC:9150
NIIN:00-435-2712
MSDS Number: BGTKH

Responsible Party
BOLT,INC
SMITH ST
BIDDEFORD, ME 04005
US

Emergency Phone: 207-883-5541

Info Phone: 207-883-5541

Cage: LO372

Contractor
BOLT,INC
1208 BIDDEFORD, ME 04005 US

Telephone: 207-883-5541

Cage: LO372

Ingredients

POLYDIMETHYLSILOXANE (SILICONE FLUID)

CAS: 63148-62-9

RTECS: JT6484500

Hazards

LD50 LC50 Mixture:ORAL RAT:5G/KG
Health Hazards Acute and Chronic:ACUTE:SLIGHT IRRITATION TO EYES:NO
OTHER DATA AVAILABLE:NO SERIOUS HEALTH EFFECTS WERE NOTED BY THE
MFR.
Explanation of Carcinogenicity:NO DATA AVAILABLE
Effects of Overexposure:SEE HEALTH HAZARDS DATA.
Medical Cond Aggravated by Exposure:NO DATA AVAILABLE.

First Aid

First Aid:INHALATION:REMOVE TO FRESH AIR.INGESTION:GET MEDICAL
ATTENTION IMMEDIATELY; EYES:WASH WITH PLENTY OF WATER FOR ABOUT 15
MINUTES;CALL A PHYSICIAN. SKIN:WASH WITH SOAP & WATER.

Fire Fighting

Flash Point Method:OC
Flash Point:>275F/134C
Extinguishing Media:DRY CHEMICAL,WATER SPRAY,FOAM,CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED
AREA.
Unusual Fire/Explosion Hazard:IRRITATING AND/OR TOXIC GASES MAY BE
PRESENT UNDER FIRE CONDITIONS.

Accidental Release

Spill Release Procedures:USE PROPER PERSONAL PROTECTION:WIPE UP
MATERIAL,RECOVER FOR PROPER DISPOSAL.RESIDUE IS SLIPPERY;APPLY
SAWDUST OR SWEEPING COMPOUND TO AREA OF SPILL TO MINIMIZE SLIP.

Handling

Handling and Storage Precautions:STORE TIGHTLY CLOSED IN A COOL,DRY
AREA.

Exposure Controls

Respiratory Protection:NONE NORMALLY REQUIRED;USE AN ADEQUATE
VENTILATION.
Ventilation:GENERAL TO MAINTAIN AN ADEQUATE VENTILATION
Protective Gloves:RUBBER OR PLASTIC IF DESIRED.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:APRON;EYE-WASH FACILITIES.
Work Hygienic Practices:AVOID CONTACT WITH EYES AND SKIN;DO NOT BREATHE
VAPOR/MIST.WASH EACH USE.
Supplemental Safety and Health
BOLT INC.AT THE ADDRESS GIVEN ON MSDS IS NOT MATCHING WITH CGAE
0DR30:PER TELEPHONE ASSISTANCE,BOLT INC IS NOT LISTED AT SMITH
STREET BIDDEFORD IN ME. TELEPHONE # ON MSDS(207)833-5541 IS AN
ANSWERING SERVICE BUT DOES NOT SPECIFY BUSINESS PLACE.TRIED TO
CONTACT,BUT NO ANSWER.USE REASONABL CARE IN EMERGENCY.

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:>572F?300C
Melt/Freeze Pt:M.P/F.P Text:-40F/-40C
Vapor Density:>1.0
Spec Gravity:0.90-0.90
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS CLEAR LIQUID,ODORLESS

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:EXTREME HEAT
Hazardous Decomposition Products:CO,CO*2,AND OXIDES OF SILCONE.

Disposal

Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.