3303 PLASTIC CEMENT

MSDS Number

BHBMX

National Stock Number

8030-00F008622

Product Name

3303 PLASTIC CEMENT

Manufacturer

GULF STATES ASPHALT CO INC

Product Identification

Product ID:3303 PLASTIC CEMENT
MSDS Date:01/31/1992
FSC:8030
NIIN:00F008622
MSDS Number: BHBMX

Responsible Party

GULF STATES ASPHALT CO INC

Emergency Phone: 713-941-4410

Info Phone: 713-941-4410

Cage: 22148

Contractor

GULF STATES ASPHALT CO INC

Cage: 22148

Ingredients

MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES

CAS: 64742-88-7

Fraction By Weight: 18-23%

OSHA PEL500 PPM

ACGIH TLV: 60 PPM

ASPHALT FUMES, ASPHALT, CUTBACK ASPHALT

CAS: 8052-42-4

RTECS: CI9900000

Fraction By Weight: 62-67%

ACGIH TLV: 5 MG/CUM

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: SOLVENT VAPORS IN POORLY
VENTILATED AREAS CAUSE DIZZINESS/NAUSEA. SKIN: IRRITATION FROM
DE-OILING. EYES: IRRITATION. CHRONIC: REPLEATED/PROLONGED
OVEREXPOSURE TO SOLVENTS CAUSE PERMANENT B RAIN/NERVOUS SYSTEM
DAMAGE, BRONCHIAL MEMBRANE IRRIATION W/POSSIBLE CHEMICAL PNEUMONIA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: SOLVENT VAPORS IN POORLY VENTILATED
AREAS CAUSE DIZZINESS/NAUSEA. SKIN: IRRITATION FROM DE-OILING.
EYES: IRRITATION. CHRONIC: REPEATED/PROLONGED OVEREXPOSURE TO
SOLVENTS CAUSES PERMANENT B RAIN/NERVOUS SYSTEM DAMAGE, MAY CAUSE
BRONCHIAL MEMBRANE IRRITATION W/POSSILBE CHEMICAL PNEUMONIA.
Medical Cond Aggravated by Exposure:IRRITATION TO BRONCHIAL MEMBRANES
W/POSSIBLE CHEMICAL PNEUMONIA.

First Aid

First Aid:SKIN: REMOVE W/MINERAL SPIRITS, WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. IF EXCESSIVELY DIZZY ADMINISTER
OXYGEN. EYES: WASH W/LARGE QUANTITIES OF WATER. OBTAIN MEDICAL
ATTENTION IN ALL CA SES.

Fire Fighting

Flash Point:>100F
Lower Limits:1
Upper Limits:7
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:TREAT AS ANY HYDROCARBON FIRE
Unusual Fire/Explosion Hazard:DON'T USE LIQUID WATER. THIS MAY CAUSE
THE FIRE TO SPREAD.

Accidental Release

Spill Release Procedures:SCOOP UP & PLACE IN COVERED METAL CONTAINER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM SPARKS, OPEN
FLAMES/OTHER SOURCES OF IGNITION.

Exposure Controls

Respiratory Protection:WEAR SELF CONTAINED BREATHING APPARATUS IF AREA
CAN'T BE ADEQUATELY VENTILATED.
Ventilation:FORCED AIR TO MAINTAIN VAPOR <60 PPM.
Protective Gloves:NOT NORMALLY REQUIRED (SEE SUPP)
Eye Protection:GLASSES, GOGGLES
Work Hygienic Practices:WASH HANDS WELL BEFORE EATING. CHANGE CLOTHES
AT LEAST DAILY.
Supplemental Safety and Health
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING/INHALING CONTENTS MAY
BE HARMFUL/FATAL. PROTECTIVE GLOVES CONT'D: UNLESS SKIN IS
EXTREMELY SENSITIVE.

Chemical Properties

Boiling Pt:B.P. Text:200-900F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:23-28

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, NITRIC ACID.
Stability Condition to Avoid:SPARKS, OPEN FLAMES, OTHER SOURCES OF
IGNITION

Disposal

Waste Disposal Methods:DISPOSE OF AS W/ANY HYDROCARBON LIQUID
IAW/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.