BHHGC - GSA FLOOR FINISH
- MSDS: BHHGC
- Manufacturer: CARROLL COMPANY
- Product Name: GSA FLOOR FINISH
- National Stock Number: 7930-00N010744
Product Identification
Product ID:GSA FLOOR FINISH
MSDS Date:07/29/1989
FSC:7930
NIIN:00N010744
MSDS Number: BHHGC
Responsible Party
GARLAND, TX 75041
Emergency Phone: 214-278-1304;214-278-1300
Info Phone: 214-278-1300;214-278-1300
Cage: OOO55
Contractor
Telephone: (214)278-1304
Cage: OOO55
Ingredients
DIBUTYL PHTHALATE (SARA III)
CAS: 84-74-2
RTECS: TI0875000
Fraction By Weight: Fraction by Wt
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3; 9192
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
LD50 LC50 Mixture:N/K (FPN
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS & SYMPTOMS OF OVEREXPOSURE.
Effects of Overexposure:SKIN AND EYES-MAY CAUSE
IRRITATION.INGESTION-MAY BE HARMFUL IF SWALLOWED.
Medical Cond Aggravated by Exposure:
First Aid
First Aid:SKIN:WASH WITH WATER.EYES:FLUSH WITH PLENTY OF POTABLE WATER
FOR AT LEAST 15 MINUTES,THEN OBTAIN PROMPT MEDICAL
ATTEN.INGESTION:GIVE MILK OR WATER TO DRINK.ADVISE THAT PRODUCT
CONTAINS ACRYLIC POLYMER ,GET MEDICAL ATTENTION,INHAL:REMOVE TO
FRESH AIR.SUPPORT BREATHING(GIVE O*2/ARTIFICIAL RESPIRATION
Fire Fighting
Flash Point Method:COC
Flash Point:>/212 F;100 C
Lower Limits:
Upper Limits:
Extinguishing Media:WATER,CO*2,FOAM,DRY CHEMICAL.
Fire Fighting Procedures:NONE(MFR).
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:CLEAN AREA WITH MOP AND BUCKET.
Neutralizing Agent:
Handling
Handling and Storage Precautions:NO SPECIAL REQUIREMENTS.
Other Precautions:NONE(MFR).
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN.
Ventilation:ADEQUATE VENTILATION(MFR).CONSULT LOCAL SAFETY/HEALTH
AUTHORITIES IF ADDITIONAL GUIDANCE IS NECESSARY
Protective Gloves:RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:OBSERVE GOOD WORK HYGIENIC PRACTICES
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212 F;100 C
Melt/Freeze Pt:M.P/F.P Text:UND
Decomp Temp:Decomp Text:
Vapor Pres:UND
Vapor Density:
Spec Gravity:1.00
pH:8.0
Evaporation Rate & Reference:
Solubility in Water:COMPLETE
Appearance and Odor:THIN LIQUID WITH ACRYLIC ODOR.
Percent Volatiles by Volume:
Corrosion Rate:
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSE ACCORDANCE WITH LOCAL,STATE AND FEDERAL
REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.