BHMPS - OVEN CLEANER

  • MSDS: BHMPS
  • Manufacturer: HYSAN CORP
  • Product Name: OVEN CLEANER
  • National Stock Number: 7930-00-459-2247
Product Identification

Product ID:OVEN CLEANER
MSDS Date:06/01/1985
FSC:7930
NIIN:00-459-2247
MSDS Number: BHMPS

Responsible Party
HYSAN CORPORATION
919 WEST 38TH STREET
CHICAGO, IL 60609
US

Emergency Phone: 312-376-8900

Info Phone: 312-376-8900

Cage: HYSAN

Contractor
HYSAN CORPORATION
HOUSTON, TX 77019 US

Telephone: 713-620-7740

Cage: HYSAN

Ingredients

SODIUM HYDROXIDE (SARA III)

CAS: 1310-73-2

RTECS: WB4900000

Fraction By Weight: < 6%

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


HEXYLENE GLYCOL

CAS: 107-41-5

RTECS: SA0810000

Fraction By Weight: < 6%

OSHA PEL C 25 PPM

ACGIH TLV: C 25 PPM; 9192


C3-C4 ALKANE BLEND

CAS: 68475-59-2

Fraction By Weight: < 6%

ACGIH TLV: 800 PPM

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE
Effects of Overexposure:CONTACT OF THE SPRAY WITH EYES, SKIN OR MUCOUS
MEMBRANES CAN CAUSE IRRITATION AND/OR CORROSION

First Aid

First Aid:EYES & SKIN: WASH OFF WITH PLENTY OF WATER. & INGESTION: GIVE
LARGE AMOUNTS OF WATER. CALL A PHYSICIAN.

Fire Fighting

Extinguishing Media:WATER, CO2
Fire Fighting Procedures:KEEP CONTAINERS COOL. USE SHIELDING TO PROTECT
PERSONNEL AGAINST BURSTING, RUPTURING OR VENTING CONTAINERS

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF FLAME, SPARK OR HEAT.
PROVIDE ADEQUATE VENTILATION. WIPE UP ANY SPILLS THEN RINSE
WITH WATER. FLOORS MAY BE SLIPPERY. USE CAUTION TO AVOID FALLS.

Handling

Handling and Storage Precautions:CONTENTS UNDER PRESSURE. DO NOT STORE
WHERE TEMPERATURES MAY EXCEED 120 F.
Other Precautions:DANGER: IRRITANT TO EYES AND MUCOUS MEMBRANES. KEEP
OUT OF REACH OF CHILDREN. READ ENTIRE LABEL BEFORE USING.

Exposure Controls

Respiratory Protection:NONE REQUIRED
Ventilation:LOCAL EXHAUST HOOD OR FAN. MECHANICAL (GENERAL) MAINTAIN
ADEQUATE VENTILATION
Protective Gloves:RUBBER GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE REQUIRED
Supplemental Safety and Health
NK

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:APPROX 212F
Vapor Pres:18 MM
Vapor Density:0.6
Spec Gravity:1.05
Evaporation Rate & Reference:UNDER 1.0
Solubility in Water:COMPLETE
Appearance and Odor:VISCOUS, OPAQUE LIQUID HAVING A MILD ODOR
Percent Volatiles by Volume:> 90

Stability

Stability Indicator/Materials to Avoid:NO
AVOID CONTACT WITH ALUMINUM OR STRONGLY ACIDIC MATERIALS.
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:OXIDES OF CARBON AND NITROGEN FORMED
UPON COMBUSTION.

Disposal

Waste Disposal Methods:DO NOT PUNCTURE OR INCINERATE CONTAINERS. GIVE
TO A DISPOSAL SERVICE EQUIPPED TO SAFELY HANDLE AND DISPOSE OF
PRESSURIZED CONTAINER

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.