Product ID:ENERGIZED ROSIN CORE SOLDER
MSDS Date:03/13/1989
FSC:3439
NIIN:00-824-9856
MSDS Number: BHQCS

ALPHA METALS

600 ROUTE 440
JERSEY CITY, NJ 07304
US

Emergency Phone: 800-424-9300

Info Phone: 201-434-6778

Cage: 96613

FRYS METALS INC (FORMER ALPHA METALS)

JERSEY CITY, NJ 07304 US

Telephone: 201-434-6778

Cage: 96613

ENERGIZED ROSIN CORE SOLDER INGREDIENTS OTHER THAN ROSIN.

Fraction By Weight: 96-99%

OSHA PEL 0.01-2.0 MG/CUM

ACGIH TLV: 0.1-2.0 MG/CUM

ROSIN ACID

CAS: 8050-09-7

Fraction By Weight: 1-4%

ACGIH TLV: 0.10 MG/CUM

LD50 LC50 Mixture:LD50 (ORAL RAT) IS >5000 MG/KG (ROSIN)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALE: IN MOLTEN STATE, ROSIN
FUMES CAN CAUSE RESPIRATORY IRRITATION, DIZZINESS, HEADACHE. LEAD
COULD CAUSE ANEMIA, INSOMNIA, WEAKNESS, CONSTIPATION, NAUSEA, AND
ABDOMINAL PAIN. SKIN: MOLTEN S OLDER WILL CAUSE BURNS. CAN CAUSE
RASH.CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NONE OF THE CHEMICALS IN THIS PRODUCT IS
LISTED BY IARC, NTP OR OSHA AS A CARCINOGEN.
Effects of Overexposure:PROLONGED EXPOSURE TO HIGH LEVELS OF AIRBORNE
OR INGESTED LEAD MAY RESULT IN KIDNEY AND NERVOUS SYSTEM
INVOLVEMENT.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF SKIN AND
RESPIRATORY DISORDERS MAY BE AT INCREASED RISK FROM EXPOSURE.

First Aid:INHALATION: REMOVE SUBJECT TO FRESH AIR. IF BREATHING
DIFFICULT, ADMINISTER OXYGEN AND CONSULT A DOCTOR. EYE: FLUSH WITH
PLENTY OF WATER FOR 15 MINUTES. GET IMMEDIATE MEDICAL ATTENTION.
SKIN: WASH WIT H SOAP AND WATER. INGESTION: DO NOT INDUCE VOMITING.
GET IMMEDIATE MEDICAL ATTENTION.

Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE.
Unusual Fire/Explosion Hazard:WHEN HEATED TO HIGH TEMPERATURES, LEAD
EMITS HIGHLY TOXIC FUMES.

Spill Release Procedures:SOLID AT ROOM TEMPERATURE. IF IN MOLTEN STATE
ALLOW TO COOL AND SOLIDIFY AND THEN SCRAPE UP.
Neutralizing Agent:NONE APPLICABLE FOR THIS MATERIAL

Handling and Storage Precautions:NO SPECIAL REQUIREMENTS FOR STORAGE.
Other Precautions:FOR INDUSTRIAL USE ONLY. KEEP OUT OF REACH OF
CHILDREN. DO NOT TAKE INTERNALLY.

Respiratory Protection:NIOSH APPROVED RESPIRATOR FOR ORGANIC VAPORS IF
TLV'S ARE EXCEEDED.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND /OR LOCAL
EXHAUST) VENTILATION TO MAINTAIN EXPOSURE LEVELS BELOW TLV'S.
Protective Gloves:NOT USUALLY NECESSARY.
Eye Protection:FACE SHIELD/EYE GOGGLES WHEN SOLDERING.
Other Protective Equipment:NOT USUALLY NECESSARY.
Work Hygienic Practices:WASH THROUGHLY AFTER HANDLING AND BEFORE
EATING. NO EATING, DRINKING, SMOKING, OR APPLYING COSMETICS AROUND
SOLDER USE.
Supplemental Safety and Health
SINCE EMPTY CCONTAINERS MAY RETAIN PRODUCT RESIDUES ALL LABELED HAZARD
PRECAUTIONS MUST BE OBSERVED.

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL WIRE, ODORLESS, VARIOUS SHAPES
AND SIZES

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS, STRONG ACIDS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:THE SMOKE FROM SOLDERING OPERATION MAY
INCLUDE SUCH COMPOUNDS AS CARBON MONOXIDE, ABIETIC ACID, ALIPHATIC
ALDEHYDES.

Waste Disposal Methods:THE ALLOY PORTION IS RECLAIMABLE. DISPOSE OF IN
ACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.