BHSYN - TRIAD VLC CUSTOM TRAY MATERIAL 95752

  • MSDS: BHSYN
  • Manufacturer: DENTSPLY YORK DIV
  • Product Name: TRIAD VLC CUSTOM TRAY MATERIAL 95752
  • National Stock Number: 6520-00F010650
Product Identification

Product ID:TRIAD VLC CUSTOM TRAY MATERIAL 95752
MSDS Date:02/28/1986
FSC:6520
NIIN:00F010650
MSDS Number: BHSYN

Responsible Party
DENTSPLY/YORK DIVISION
570 W. COLLEGE AVENUE
YORK, PA 17405

Emergency Phone: (717) 845-7511

Info Phone: (717) 845-7511

Cage: 16969

Contractor
DENTSPLY/YORK DIV/TRUBYTE DIV
872 YORK, PA 17405-0872 US

Telephone: 717-845-7511

Cage: 16969

Ingredients

ACRYLIC MONOMER

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MILD IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: MILD IRRITATION

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN, GET MED
ATTN. SKIN: WASH W/SOAP & WATER, REMOVE CONTAMINATED CLOTHING.

Fire Fighting

Extinguishing Media:WATER FOG, FOAM, CO2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:NO SPECIAL PROCEDURES REQUIRED.

Handling

Handling and Storage Precautions:REFRIGERATED STORAGE PROLONGS SHELF
LIFE.
Other Precautions:THIS MATERIAL SHOULD BE HANDLED & USED ONLY IN A
MANNER CONSISTENT WITH THE PRODUCT INSTRUCTIONS.

Exposure Controls

Respiratory Protection:USE DUST MASK OR EXHAUST TO AVOID DUST FROM
GRINDING POLYMERIZED MATERIAL.
Ventilation:USE LOCAL EXHAUST WHEN GRINDING POLYMERIZED MATERIAL.
Protective Gloves:NONE UNLESS CUTS OR ABRASIONS
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

Vapor Pres:<1
Spec Gravity:1.6
Appearance and Odor:BLUE SHEETS, MILD ESTER ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING & REDUCING AGENTS
Stability Condition to Avoid:HEAT, IGNITION SOURCES & SUNLIGHT
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:POLYMERIZES IN 2 HOURS AT 100C WITH
LOW EXOTHERM.

Disposal

Waste Disposal Methods:SPREAD OUT MATERIALS TO EXPOSE SURFACES TO
SUNLIGHT OR ARTIFICIAL LIGHT UNTIL SOLID. DISPOSE OF AS
NONHAZARDOUS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.