BHTBS - TRIAD VLC RELINE 85757, 95758 SHEET
- MSDS: BHTBS
- Manufacturer: DENTSPLY YORK DIV
- Product Name: TRIAD VLC RELINE 85757, 95758 SHEET
- National Stock Number: 6520-00F010690
Product Identification
Product ID:TRIAD VLC RELINE 85757, 95758 SHEET
MSDS Date:11/04/1985
FSC:6520
NIIN:00F010690
MSDS Number: BHTBS
Responsible Party
YORK, PA 17405
Emergency Phone: (717) 845-7511
Info Phone: (717) 845-7511
Cage: 16969
Contractor
Telephone: 717-845-7511
Cage: 16969
Ingredients
ACRYLIC MONOMER
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION & SENSITIZATION.
INHALATION: IRRITATION OF MUCOUS MEMBRANES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION OF MUCOUS MEMBRANES.
SKIN: IRRITATION & SENSITIZATION.
Medical Cond Aggravated by Exposure:SENSITIZATION
First Aid
First Aid:EYE: PROMPTLY FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN,
GET MED ATTN. SKIN: WASH W/SOAP & WATER, REMOVE CONTAMINATED
CLOTHING.
Fire Fighting
Extinguishing Media:WATER FOG, FOAM, CO2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:NO SPECIAL PROCEDURES REQUIRED.
Handling
Handling and Storage Precautions:REFRIGERATED STORAGE PROLONGS SHELF
LIFE.
Other Precautions:THIS MATERIAL SHOULD BE HANDLED & USED ONLY IN A
MANNER CONSISTENT WITH THE PRODUCT INSTRUCTIONS.
Exposure Controls
Respiratory Protection:USE DUST MASK OR EXHAUST TO AVOID DUST FROM
GRINDING POLYMERIZED MATERIAL.
Ventilation:USE LOCAL EXHAUST WHEN GRINDING POLYMERIZED MATERIAL.
Protective Gloves:NONE
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:<40C
Vapor Pres:<1
Vapor Density:>1
Spec Gravity:1.2
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FIBERED PINK ROPES & SHEETS
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING & REDUCING CHEMICALS
Stability Condition to Avoid:SUNLIGHT, HEAT & IGNITION SOURCES
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:POLYMERIZES IN 2 HOURS AT 100C W/LOW
EXOTHERM
Disposal
Waste Disposal Methods:SPREAD OUT MATERIALS TO EXPOSE SURFACES TO
SUNLIGHT OR ARTIFICIAL LIGHT UNTIL SOLID. DISPOSE OF AS
NONHAZARDOUS WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.