BHTBY - 99105A DENTSPLY REGALLOY 100 PARTIAL
- MSDS: BHTBY
- Manufacturer: DENTSPLY YORK DIV
- Product Name: 99105A DENTSPLY REGALLOY 100 PARTIAL
- National Stock Number: 6520-00F010696
Product Identification
Product ID:99105A DENTSPLY REGALLOY 100 PARTIAL
MSDS Date:12/10/1987
FSC:6520
NIIN:00F010696
MSDS Number: BHTBY
Responsible Party
YORK, PA 17405
Emergency Phone: (717) 845-7511
Info Phone: (717) 845-7511
Cage: 16969
Contractor
Telephone: 717-845-7511
Cage: 16969
Ingredients
NICKEL (SARA III)
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 75%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9192
CHROMIUM (SARA III)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 15%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
MANGANESE (SARA III)
CAS: 7439-96-5
RTECS: OO9275000
OSHA PEL (C) 5 MG/M3 DUST
ACGIH TLV: 5 MG/M3 DUST 9293
COLUMBIUM, NIOBIUM
CAS: 7440-03-1
Fraction By Weight: <5%
ALUMINUM (SARA III)
CAS: 7429-90-5
RTECS: BD0330000
OSHA PEL 15MG/M3 DUST/5 FUME
ACGIH TLV: 10MG/M3 DUST; 9192
BERYLLIUM (SARA III)
CAS: 7440-41-7
RTECS: DS1750000
Fraction By Weight: 1%
OSHA PEL 2 UG/M3
ACGIH TLV: 0.002PPM; A2; 9293
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HIGH CONCENTRATIONS DUSTS
MAY CAUSE IRRITATION OF THE THROAT. EYES: IRRITATION. SKIN: NICKEL
MAY CAUSE SENSITIVITY & DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HIGH CONCENTRATION DUSTS MAY CAUSE
IRRITATION OF THE THROAT & PULMONARY DISEASE. EYES: IRRITATION.
SKIN: NICKELS MAY CAUSE SENSITIVITY & DERMATITIS.
Medical Cond Aggravated by Exposure:DERMATITIS, SENSITIVITY & PULMONARY
DISEASE
First Aid
First Aid:INHALATION: CONTACT PHYSICIAN. EYES: FLUSH W/WATER.
Fire Fighting
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:NO SPECIAL PROCEDURES REQUIRED.
Handling
Handling and Storage Precautions:USE SPECIAL PRECAUTIONS DURING
OPERATIONS WHICH GENERATE HIGH CONCENTRATIONS OF DUST.
Other Precautions:THIS MATERIAL SHOULD BE HANDLED & USED ONLY IN A
MANNER CONSISTENT W/THE PRODUCT INSTRUCTIONS.
Exposure Controls
Respiratory Protection:IN DUSTY AREAS USE NIOSH APPROVED SCHEDULE 21C
RESPIRATOR.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION FOR OPERATIONS GENERATING
AIRBORNE MATERIAL.
Protective Gloves:DURING MELTING TO PREVENT BURNS
Eye Protection:DETERMINED BY OPERATION
Other Protective Equipment:NONE REQUIRED
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:1950F
Spec Gravity:8.0
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SILVERY METALLIC APPEARANCE W/NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
MINERAL ACIDS
Hazardous Decomposition Products:HYDROGEN
Disposal
Waste Disposal Methods:NO SPECIAL PRECAUTIONS ARE REQUIRED AS
BERYLLIUM-NICKEL ALLOYS ARE NOT CLASSIFIED AS HAZARDOUS WASTE UNDER
THE RESOURCE CONSERVATION & RECOVERY ACT. DISPOSE OF IN ACCORDANCE
W/FEDERAL, STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.