Product ID:BRAVO
MSDS Date:01/01/1987
FSC:6520
NIIN:00F011163
MSDS Number: BJBHG

J.M. NEY COMPANY

NEY INDUSTRIAL PARK
BLOOMFIELD, CT 06002

Emergency Phone: (203) 242-2281

Info Phone: (203) 242-2281

Cage: FO552

NEY J M CO DENTAL DIVISION

BLOOMFIELD, CT 06002 US

Telephone: (203) 242-2281

Cage: 6M651

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 10%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 4.6%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DUST OF TIN OXIDE HAVE
CAUSED RELATIVELY BENIGN PNEUMOCONOISIS. INGESTION: COPPER EFFECTS
THE GASTROINTESTINAL TRACT & TIN IS GENERALLY NOT CONSIDERED TOXIC.
SKIN: BURNS & CUTS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DUST OF TIN OXIDE HAVE CAUSED
RELATIVELY BENIGN PNEUMOCONOISIS. INGESTION: COPPER EFFECTS THE
GASTROINTESTINAL TRACT & TIN IS GENERALLY NOT CONSIDERED TOXIC.
SKIN: BURNS & CUTS.

First Aid:INHALATION: REMOVE FROM EXPOSURE & OBTAIN PROMPT MEDICAL
ATTENTION.

Flash Point:NON-FLAMMABLE

Spill Release Procedures:IF LARGE QUANTITIES OF DUST ARE GENERATED, USE
INDUSTRIAL VACUUM TO CLEAN UP. MOLTEN METAL SHOULD BE ALLOWED TO
SOLIDIFY BEFORE CLEAN UP.

Handling and Storage Precautions:WEAR PROTECTIVE EQUIPMENT WHEN
CUTTING, GRINDING, SOLDERING, WELDING, MELTING, MACHINING &
HANDLING OF NON-FERROUS METALS.
Other Precautions:AVOID CUTS & BURNS.

Respiratory Protection:IN ACCORDANCE W/NIOSH WHEN CUTTING, GRINDING,
SOLDERING, & WELDING.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION WHEN GENERATING DUST,
MIST, & FUMES TO KEEP Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Supplemental Safety and Health

Appearance and Odor:SOLID METAL,
WIRE/PLATE/STRIP/INGOTS/NUGGETS/SWITCHES/ELECTRONIC/DENTAL FORM.

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES

Waste Disposal Methods:DISPOSE OF DUSTS USING APPROVED METHODS
CONSISTANT WITH APPLICABLE LOCAL, STATE, & FEDERAL REGULATIONS.
MOLTEN METAL SHOULD BE RECLAIMED USING STANDARD INDUSTRIAL
PRACTICES SUCH AS REMELTING & REFININ G.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.