BJBJL - GLASIONOMER CEMENT TYPE II VARNISH

  • MSDS: BJBJL
  • Manufacturer: SHOFU DENTAL CORP
  • Product Name: GLASIONOMER CEMENT TYPE II VARNISH
  • National Stock Number: 6520-00F011191
Product Identification

Product ID:GLASIONOMER CEMENT TYPE II VARNISH
MSDS Date:05/04/1988
FSC:6520
NIIN:00F011191
MSDS Number: BJBJL

Responsible Party
SHOFU DENTAL CORPORATION
4025 BOHANNON DRIVE
MENLO PARK, CA 94025

Emergency Phone: (415) 324-0085

Info Phone: (415) 324-0085

Cage: 9K743

Contractor
SHOFU DENTAL CORP
MENLO PARK, CA 94025-1096 US

Telephone: 415-324-0085

Cage: 9K743

Ingredients

ETHYL ACETATE (SARA III)

CAS: 141-78-6

RTECS: AH5425000

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATING TO EYES, NOSE,
THROAT, SKIN & RESPIRATORY.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATING TO EYES, NOSE, THROAT,
SKIN, & RESPIRATORY, LIVER & KIDNEY DISEASE.
Medical Cond Aggravated by Exposure:RESPIRATORY, LIVER/KIDNEY DISEASE

First Aid

First Aid:EYES: WASH W/LARGE AMTS OF WATER, SEE DOCTOR. SKIN: FLUSH
EXPOSED AREA W/WATER. SEE DOCTOR, IF IRRITATION DEV. INHALATION: IF
ABUSIVELY, PERSON SHOULD BE REMOVED TO FRESH AIR, SEE DOCTOR.
INGESTION: G ET MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:CC
Flash Point:24F
Lower Limits:2.2%
Upper Limits:11%
Extinguishing Media:ALCOHOL FOAM, CO2, DRY CHEMICAL

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. VENTILATE AREA OF
SPILL OR LEAK. ABSORB ON PAPER TOWELS. BURN THE PAPER IN A SUITABLE
LOCATION AWAY FROM COMBUSTIBLE MATERIALS.

Handling

Handling and Storage Precautions:STORE IN A COOL, DARK PLACE WITH TOP
TIGHTLY CLOSED.
Other Precautions:HANDLING OF PRODUCT EXCLUSIVELY BY DENTAL SPECIALISTS
ACCORDING TO INSTRUCTIONS FOR USE. CONCENTRATION OF ETHYL ACETATE
IS BELOW PEL & TLV LEVELS OF 400 PPM.

Exposure Controls

Ventilation:LOCAL EXHAUST
Protective Gloves:MAY BE REQUIRED
Eye Protection:MAY BE REQUIRED
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:171F
Melt/Freeze Pt:M.P/F.P Text:-117F
Vapor Pres:76
Vapor Density:3.0
Spec Gravity:0.9
Evaporation Rate & Reference:(BU AC = 1): 6
Solubility in Water:8.7
Appearance and Odor:THIN, CLEAR, YELLOW LIQUID.

Stability

Stability Indicator/Materials to Avoid:YES
NITRATES, STRONG OXIDIZERS, PLASTICS, RUBBER
Stability Condition to Avoid:HEAT, FLAMES
Hazardous Decomposition Products:CO

Disposal

Waste Disposal Methods:ABSORB IN VERMICULITE, DRY SAND, EARTH OR A
SIMILAR MATERIAL & DISPOSE IN A SECURED SANITARY LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.