Product ID:SNAP/RELATE RESIN POWDERS S441 / S458M
MSDS Date:10/25/1985
FSC:6520
NIIN:00F012299
MSDS Number: BJCDF

PARKELL PRODUCTS

155 SCHMITT BLVD
FARMINGDALE, NY 11735

Emergency Phone: (516) 249-1134

Info Phone: (516) 249-1134

Cage: FO568

PARKELL PRODUCTS INC (FORMERLY IN LONG ISLAND NY)

376 FARMINGDALE, NY 11735-1403 US

Telephone: 800-535-5053/800-243-7446

Cage: FO568

BENZOYL PEROXIDE, DI-BENZOYLPEROXIDE

CAS: 94-36-0

RTECS: DM8575000

Fraction By Weight: <3.0%

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

MINERAL PIGMENT

Fraction By Weight: <2.0%

CADMIUM (SARA III)

CAS: 7440-43-9

RTECS: EU9800000

Fraction By Weight: <0.8%

OSHA PEL SEE 1910.1027

ACGIH TLV: 0.01 MG/M3 DUST;9394

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <0.2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: KEEP DUST OUT TO PREVENT
POSSIBLE IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IT'S NOT KNOWN TO CAUSE SIGNIFICANT HEALTH
PROBLEMS. IT'S CONSIDERED AN INERT OR NUISANCE DUST.

First Aid:INHALATION: REMOVE TO FRESH AIR. GET MEDICAL HELP IF
DISCOMFORT PERSISTS. EYES: FLUSH W/WATER FOR 5 MINUTES, INCLUDING
UNDER EYELIDS. SKIN: WASH W/SOAP & WATER. INGESTION: RINSE MOUTH
OUT WITH WATER. CALL DOCTOR.

Flash Point Method:TCC
Flash Point:304F
Extinguishing Media:WATER, CO2, DRY CHEMICAL. AVOID EXTINGUISHING
METHODS WHICH MAY GENERATE DUST CLOUDS.
Fire Fighting Procedures:WATER STREAM CAN DISPERSE DUST IN AIR,
PRODUCING A FIRE HAZARD & POSSIBLE EXPLOSION HAZARD IF EXPOSED TO
IGNITION SOURCE.
Unusual Fire/Explosion Hazard:POLYMER DUST IS COMBUSTIBLE. THE
EXPLOSIVE LIMITS OF THE POLYMER PARTICLES SUSPENDED IN AIR ARE
APPROXIMATELY THOSE OF COAL DUST. WEAR SCBA.

Spill Release Procedures:SWEEP UP TO AVOID SLIPPING HAZARD. KEEP
AIRBORNE PARTICULATE AT A MINIMUM WHEN CLEANING UP SPILLS.

Handling and Storage Precautions:STORE IN COOL DRY PLACE. KEEP
CONTAINER CLOSED TO PREVENT WATER ABSORPTION & CONTAMINATION.
Other Precautions:HIGH TEMPERATURE PROCESSING EQUIPMENT SHOULD BE
VENTILATED. AVOID INHALATION OF DUST.

Respiratory Protection:NUISANCE DUST TYPE IF NEEDED.
Ventilation:LOCAL EXHAUST: PROCESSING EQUIPMENT
Protective Gloves:IF HOT PLASTIC IS HANDLED
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Spec Gravity:1.125
Solubility in Water:INSOLUBLE
Appearance and Odor:FINE TAN POWDER, FAINT ODOR IN BULK.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEATING >300C.
Hazardous Decomposition Products:ETHYLMETHACRYLATE & CO

Waste Disposal Methods:MAY BE DISPOSED OF IN LANDFILL OR INCINERATED.
FOLLOW FEDERAL, STATE, & LOCAL REGULATIONS FOR DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.