Product ID:RX NATURELLE
MSDS Date:01/01/1987
FSC:6520
NIIN:01-176-7610
MSDS Number: BJCTG

JENERIC INDUSTRIES, INC.

125 NORTH PLAINS INDUSTRIAL ROAD
WALLINGFORD, CT 06492

Emergency Phone: (203) 265-7397

Info Phone: (203) 265-7397

Cage: 58796

JENERIC INDUSTRIES INC

WALLINGFORD, CT 06492-5841

Telephone: (203) 265-7397

Cage: 58796

GOLD

CAS: 7400-57-5

RTECS: MD5070000

Fraction By Weight: 0-2%

PALLADIUM

CAS: 7440-05-3

Fraction By Weight: 76-80%

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 8-10%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

GALLIUM

CAS: 7440-55-3

RTECS: LW8600000

Fraction By Weight: 6-9%

INDIUM

CAS: 7440-74-6

RTECS: NL1050000

Fraction By Weight: 0-5%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MAY CAUSE DERMATITIS. INGETION:
TOXIC. INHALATION: IRRITATION OF THE UPPER RESPIRATORY TRACT & BONE
MARROW FUNCTION DEPRESSION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: MAY CAUSE DERMATITIS. INGESTION: TOXIC.
INHALATION: TOXIC. INHALATION: IRRITATION OF THE UPPER RESPIRATORY
TRACT & DEPRESSION OF BONE MARROW FUNCTION.
Medical Cond Aggravated by Exposure:DERMATITIS

First Aid:EYE: FLUSH THOROUGHLY W/RUNNING WATER, EVEN UNDER EYELID.
SKIN: FLUSH & SCRUB THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE
PERSON TO FRESH AIR, ASSIST BREATHING W/ADDITIONAL OXYGEN IF
NECESSARY. INGE STION: GIVE LARGE QUANTITIES OF WATER TO INDUCE
VOMITING. CONTACT PHYSICIAN.

Unusual Fire/Explosion Hazard:THE ALLOYS ARE FIRE & EXPLOSION
RESISTANT.

Spill Release Procedures:REMOVE DUST BY VACUUMING OR WET SWEEPING TO
PREVENT POWDERING IN THE AIR. USE CONTAINERIZED DISPOSAL. WHENEVER
POSSIBLE, RECOVER DUST BECAUSE IT HAS ECONOMIC VALUE.

Handling and Storage Precautions:AVOID CONTACT W/SKIN. GRIND W/ADEQUATE
VENTILATION ONLY.
Other Precautions:MELTING & FABRICATION OF THESE ALLOYS SHOULD BE DONE
IN THE PRESENCE OF ADEQUATE VENTILATION.

Respiratory Protection:WEAR APPROVED RESPIRATORS.
Ventilation:MECHANICAL/LOCAL EXHAUST VENTILATION FILTRATION SHOULD BE
EMPLOYED.
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES
Other Protective Equipment:COVERALLS & PROTECTIVE CLOTHING.
Supplemental Safety and Health
EACH INGOT WEIGHT: 1 DWT (TROY).

Melt/Freeze Pt:M.P/F.P Text: 2160-2192F
Spec Gravity: 10.5
Solubility in Water:INSOLUBLE
Appearance and Odor:PLATINUM COLOR, NO ODOR.

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HIGH TEMPERATURES
Hazardous Decomposition Products:FUMES

Waste Disposal Methods:NO SPECIAL PRECAUTIONS ARE REQUIRED FOR BULK
(SOLID) SHAPES, SUCH AS INGOTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.