Product ID:TECTYL Q 1449 A
MSDS Date:08/09/1990
FSC:9150
NIIN:01-030-0632
MSDS Number: BJDTT

VALVOLINE, INC

200 E MAIN ST
LEXINGTON, KY 40512
US

Emergency Phone: 606-264-7000

Cage: FO793

VALVOLINE, INC

14000 LEXINGTON, KY 40512 US

Telephone: (606) 264-7000

Cage: FO793

LUBE OIL ADDITIVE (30% BARIUM CMPD; 30% ZINC CMPD)

Fraction By Weight: 5-10%

PETROLEUM LUBE OIL

CAS: 64742-65-0

RTECS: PY8038500

Fraction By Weight: 55-70%

OSHA PEL 5MG/M3 (OIL MIST)

ACGIH TLV: 5MG/M3;STEL-10MG/CUM

N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 10-15%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Health Hazards Acute and Chronic:CHRONIC: MAY CAUSE CNS DEPRESSION
AND/OR EYE DAMAGE.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:ACUTE:CAN CAUSE EYES MODERATE
IRRITATION,REDNESS,TEARING;SKIN:SLIGHT IRRITATION; SWALLOWING:GI
IRRITATION,NAUSEA,VOMITING,& DIARRHEA; BREATHING:(OF MIST)
IRRITATION OF NASAL & RESPIRATORY PASSAGES. CH RONIC:CAN CAUSE
ANEMIA, & LIVER,KIDNEY,EYE & LUNG DAMAGE IN LAB ANIMALS. MAY CAUSE
EYE DAMAGE IN HUMANS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN:THOROUGHLY WASH EXPOSED AREA W/SOAP & WATER. REMOVE
CONTAMINATED CLOTHING; LAUNDER BEFORE RE-USE. REMOVE CONTAMINATED
SHOES PROMPTLY & DISCARD. EYES:FLUSH W/LARGE AMOUNTS OF WATER.
SWALLOWED:DO NOT INDUCE VOMITING. KEEP PERSON WARM, QUITE & GET
MEDICAL ATTENTION.

Flash Point Method:CC
Flash Point:90 F OR 32 C
Lower Limits:1.4%
Extinguishing Media:REGULAR FOAM OR CARBON DIOXIDE OR DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS WITH
FULL FACEPIECE OPERATED IN A POSITIVE PRESSURE DEMAND MODE WHEN
FIGHTING FIRES.WATER/FOAM MAY CAUSE VIOLENT FROTHNG
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH
ON/NEAR DRUM (EVEN EMPTY)BECAUSE PRODUCT CAN IGNITE
EXPLOSIVELY.GROUND/BOND-5 GAL PAILS & LARGER WHEN MATERIAL IS
TRANSFERRED

Spill Release Procedures:SMALL:ABSORB LIQUID ON PAPER OR OTHER
ABSORBENT MATL. LARGE:ELIM. ALL IGNIT SOURCES. EXCLUDE PERSONS W/O
PPE FROM AREA. STOP SPILL AT SOURCE;DIKE SPILL AREA; PUMP LIQUID TO
SALVAGE TANK. CONTINUE W/SM ALL SPILL PROC. PROTECT WATER BODIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY HEAT,SPARKS,FLAME.STORE
W/ADEQUATE VENT. MAINTAIN AMBIENT AIR CONC BELOW PEL. AVOID CONTACT
W/EYES.DO NOT USE CUTTING/WELDING TORCH ON CONTR
Other Precautions:CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN
EMPTIED DUE TO PRODUCT RESIDUES (VAPOR, LIQUID AND/OR SOLID). ALL
HAZARD PRECAUTIONS MUST BE OBSERVED.

Respiratory Protection:NIOSH/MSHA RESPIRATOR IF PEL IS EXCEEDED.
NEGATIVE PRESSURE NIOSH/MSHA RESPIRATOR CAN BE USED AS SPECIFIED BY
SAFETY EQUIPMENT SUPPLIER. IMPLEMENT ENGINEERING & ADMINISTRATIVE
CONTROLS ALSO.
Ventilation:PROVIDE SUFFICIENT GENERAL AND/OR LOCAL EXHAUST
VENTILATION.
Protective Gloves:RESISTANT GLOVES.
Eye Protection:WEAR SAFETY GOGGLES OR GLASSES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:MINIMIZE EXPOSURE THROUGH GOOD HYGIENIC
PRACTICES.
Supplemental Safety and Health
SKIN ABSORPTION MAY POTENTIALLY CONTRIBUTE TO THE OVERALL EXPOSURE TO
THIS MATERIAL. APPROPRIATE MEASURES SHOULD BE TAKEN TO PREVENT SKIN
ABSORPTION SO THAT TLV IS NOT INVALIDATED.

Boiling Pt:B.P. Text:243 F @ NTP
Vapor Pres:4.40MM HG
Vapor Density:>AIR
Spec Gravity:.910 @ 60 F
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:10-25

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY FORM CARBON DIOXIDE, CARBON
MONOXIDE, VARIOUS HYDROCARBONS AND SULFUR COMPOUNDS.

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE AND FEDERAL
REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.