BJHDS - 30011 OATEY 5 PASTE FLUX

  • MSDS: BJHDS
  • Manufacturer: OATEY COMPANY
  • Product Name: 30011 OATEY 5 PASTE FLUX
  • National Stock Number: 6850-00F013124
Product Identification

Product ID:30011 OATEY 5 PASTE FLUX
MSDS Date:08/18/1994
FSC:6850
NIIN:00F013124
MSDS Number: BJHDS

Responsible Party
OATEY COMPANY
4700 W 160TH ST
CLEVELAND, OH 44135-2632
US

Emergency Phone: 303-623-5716 COLLECT

Info Phone: 216-267-7100

Cage: EO573

Contractor
OATEY COMPANY
35906 CLEVELAND, OH 44135-2632 US

Telephone: 216-267-7100

Cage: EO573

Ingredients

PETROLATUM, GREASE *95-1*

CAS: 8009-03-8

Fraction By Weight: 65-75%


ZINC CHLORIDE

CAS: 7646-85-7

RTECS: ZH1400000

Fraction By Weight: 20-25%

OSHA PEL 1 MG/CUM

ACGIH TLV: 1 MG/CUM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


AMMONIUM CHLORIDE

CAS: 12125-02-9

RTECS: BP4550000

Fraction By Weight: 1-5%

OSHA PEL 10 MG/CUM

ACGIH TLV: 10 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY IRRITATION.
SKIN: IRRITATION, BURNS, DERMATITIS. EYES: IRRITATION, BURNS,
CORNEAL DAMAGE. INGESTION: BURNS OF MOUTH & THROAT, KIDNEY DISEASE,
DEATH.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, BURNS, FEVER, CHILLS, MUSCULAR
PAIN, VOMITING, SWEATING, DIARRHEA, STRICTURES, SHOCK.

First Aid

First Aid:SKIN: WASH THOROUGHLY W/SOAP & WATER. EYES: MOVE TO FRESH AIR
& IRRIGATE EYES W/WATER FOR 15 MINS. INHALATION: MOVE TO FRESH AIR.
GIVE CPR/OXYGEN IF NEEDED. KEEP QUIET & WARM. INGESTION: DRINK
WATER. AVOID ALCOHOLIC BEVERAGES. NEVER GIVE ANYTHING BY MOUTH TO
AN UNCONSCIOUS PERSON. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:540F
Extinguishing Media:SMALL: DRY CHEMICAL, CO2, WATER, FOAM.
Fire Fighting Procedures:EVACUATE AREA.

Accidental Release

Spill Release Procedures:VENTILATE AREA. SAFETLY STOP LEAK. TAKE UP
W/SAND, EARTH/OTHER ABSORBING MATERIAL & PLACE IN A CLEAN, DRY
LEAK-PROOF CONTAINER.

Handling

Handling and Storage Precautions:DON'T STORE NEAR HEAT.

Exposure Controls

Respiratory Protection:IF SOLDERING IN AN ENCLOSED AREA, USE NIOSH
APPROVED CANISTER.
Ventilation:GENERAL MECHANIC: USE IN CLOSED AREAS. LOCAL EXHAUST: OPEN
DOORS & WINDOWS.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Work Hygienic Practices:NORMAL GOOD HYGIENE PRACTICES.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:638.6F
Vapor Density:>1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:YELLOW PASTE W/VERY LITTLE ODOR.
Percent Volatiles by Volume:7-10

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:HYDROCARBONS, HYDROGEN CHLORIDE, CO,
CO2, SMOKE.

Disposal

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. CORROSIVE D002

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.