BJLMP - PSI 631 SILICONE SEALANT P/N 7-600

  • MSDS: BJLMP
  • Manufacturer: POLYMERIC SYSTEMS INC
  • Product Name: PSI 631 SILICONE SEALANT P/N 7-600
  • National Stock Number: 8040-01-275-5052
Product Identification

Product ID:PSI 631 SILICONE SEALANT P/N 7-600
MSDS Date:07/05/1990
FSC:8040
NIIN:01-275-5052
MSDS Number: BJLMP

Responsible Party
POLYMERIC SYSTEMS, INC.
WHEATLAND & MASON STREETS
PHOENIXVILLE, PA 19460
US

Emergency Phone: 215-935-1170

Info Phone: 215-935-1170

Preparer: ED CLUFF, TECH DIRECTOR

Cage: 0KND3

Contractor
POLYMERIC SYSTEMS, INC.
PHOENIXVILLE, PA 19460 US

Telephone: 610-935-1170

Cage: 0KND3

Ingredients

DIHYDROXYPOLYDIMETHYLSILOXANE

CAS: 70131-67-8


SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


POLYDIMETHYLSILOXANE FLUID

CAS: 9016-00-6

RTECS: TQ2690000


AMORPHOUS SILICA

CAS: 7631-86-9

RTECS: VV7322000

OSHA PEL 80 MG/M3 TWA


METHYLTRIS (METHYLETHYLKETOXIMINO) SILANE

CAS: 22984-54-9

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:INHALATION: IRRITATION OF MUCOUS MEMBRANE.
INGESTION: IRRITATION OF INTESTINAL TRACT. SKIN CONTACT:
IRRITATION. AND EYE CONTACT: IRRITATION.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. INGESTION: DO NOT INDUCE
VOMITING. CONSULT A PHYSICIAN. SKIN CONTACT: WASH WITH SOAP AND
WATER. EYE CONTACT: FLUSH WITH WATER AT LEAST 15 MINUTES. CONSULT A
PHYSICIAN IF IRRITATION PERSISTS.

Fire Fighting

Flash Point Method:OC
Flash Point:250 F/121 C
Extinguishing Media:WATER, CO2, DRY CHEMICALS, SAND.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:TOXIC GASES AND AEROSOLS MAY BE PRODUCED
BY COMBUSTIONS, E.G. CO, SIO2

Accidental Release

Spill Release Procedures:USE AN ABSORBENT OR LET CURE IN AIR.

Handling

Handling and Storage Precautions:STORE BELOW 122F (50C).
Other Precautions:DO NOT INGEST.

Exposure Controls

Respiratory Protection:AIR SUPPLIED OR SELF CONTAINED BREATHING
APPARATUS IN UNVENTILATED AREAS.
Ventilation:GENERAL MECHANICAL RECOMMENDED. LOCAL EXHAUST MAY BE
REQURED IN POORLY VENTILATED CLOSE QUARTERS.
Protective Gloves:BUTYL
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE
Supplemental Safety and Health

Chemical Properties

Vapor Pres:< 5 MMHG
Vapor Density:>1
Spec Gravity:1.3
Evaporation Rate & Reference:> 1 (BUTYL ACETATE=1)
Solubility in Water:< 1%
Appearance and Odor:PASTE LIKE WITH SLIGHT MEDICINAL ODOR.
Percent Volatiles by Volume:<5

Stability

Stability Indicator/Materials to Avoid:YES
AVOID EXPOSURE TO MOISTURE DURING STORAGE.
Stability Condition to Avoid:STORE BELOW 50C.

Disposal

Waste Disposal Methods:DISPOSE IN LANDFILL AS SYNTHETIC RUBBER SCRAP.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.